REMINGTON RACS vs CADEX DUAL STRIKE

by | Apr 5, 2017 | Cadex, Rifle Chassis System | 0 comments

Guide – Remington RACS versus Cadex Defence Dual Strike Rifle Chassis

Remington XM2010 RACS vs Cadex

Left:Remington XM2010 Features a RACS Chassis originally developed with Cadex Defence.

Right: The latest badass sniper rifle from Cadex Defence CDX Kraken

Remington XM2010 RACS vs Cadex

I always find it quite interesting as to what the predominant questions are that come from the contact pages at any of my websites. In the case of this website Modular Rifle I think all of the questions except for one have in one way or another pertained to The Remington RACS Chassis and variants used on the Remington Military Sniper Rifle XM2010 (currently known as the Remington M2010) and it’s visually similar but mechanically different siblings the Remington MSR, Remington PSR and the Remington CSR.

There’s is quite a bit of confusion about the Remington RACS and Cadex Chassis Systems which is completely understandable. Remington Military isn’t very forthcoming with information and Cadex Defence is evolving their modular rifle and chassis lineup with impressive speed.  Maybe we can sort some of it out with our guide below.

 

If you have additional information to improve this page please use the contact button below! Thanks.

Contact Us

Save

Save

Save

WHAT IS REMINGTON RACS?

Remington RACS vs Cadex Dual Strike

Remington RACS vs Cadex

What is Remington RACS?

RACS is the acronym for the Remington Military “Remington Accessory Chassis System” . The Remington RACS was developed by a joint effort between Remington Military and Cadex Defence.

The patent pending Remington Accessory Chassis System (RACS) incorporates state-of-the-art operator-defined attributes such as a free-float tubular design and a fully featured front handguard section. Operator selectable auxiliary rail sections in various lengths can be attached to any of the seven remaining facets of the octagonal handguard, which allows the operator to install clip-on in-line night vision systems. The folding RACS buttstock provides the operator with a wide variety of adjustments to allow setting the system to suit the shooter and the operating conditions.

Now the above all sounds good right? Remington also refers to the RACS as “Remington Arms Chassis System” The Remington Military website uses both variations. It took me a few minutes to realize the difference

Save

Are Remington Defence RACS the Same as Cadex Defence Chassis?

Observant shooters have noticed that the Remington RACS closely resembles Cadex Defense Chassis. This makes perfect sense. The Original Remington XM2010 was developed by a partnership between Remington Military and Cadex Defence.

What Cadex Chassis did the Remington XM2010 sniper rifle use? The Cadex Dual Strike is the closest match but not identical.

What’s Better Remington RACS or Cadex Dual Strike? Cadex has been upgrading the Dual Strike pretty regularly. At this time Cadex is on their 4th generation Dual Strike. Remington Military has made no publicly known changes to the RACS since release. While I can’t say first hand which is better but I will be putting my money down on the Cadex. The Cadex is also less expensive then the Remington.

Remington Defense Chassis System versus Remington Accessory Chassis System

Remington Defense Chassis System versus Remington Accessory Chassis System

The Remington Arms Chassis System refers to the Remington RACS on a complete Remington M2010/XM2010 ESR Enhanced Sniper Rifle when bought or fielded as a package.

The Remington Accessory Chassis System version of the RACS is how Remington Military refers to the RACS when purchased as an accessory and without a barreled action. Remington only list this as being available in sort action.

Now my take is the Remington Military website is simply out of date. EuroOptic list the RACS as being available in 300 Winchester Magnum, Remington 700 Long Action.

Save

 

MULTIPLE VERSIONS OF REMINGTON RACS

There are multiple versions of Remington RACS. The RACS chassis that is used in the XM2010, M2010 Sniper Rifle and the RACS chassis’s used in the Remington MSR, CSR and PSR Sniper Rifles.

Remington MSR, CSR and PSR RACS versus Cadex Chassis Systems

The Remington RACS Chassis in use on the Remington Defense Modular Sniper Rifle “MSR” and Remington Defense MK21 Precision Sniper Rifle “PSR” use a proprietary bolt action receiver and interchangeable barrels. This Remington RACS chassis in not compatible with any other receiver or barreled action. This RACS Chassis will not accept a Remington 700 receiver or barreled action.

Compatibility Guide – Remington RACS vs Cadex Chassis

The Remington RACS is only compatible with the Remington 700 and Remington 700 clone long and short actions. On the other hand the Cadex line of Chassis is compatible with the following brands of rifle actions (not all chassis, not all rifle models).

  • Sako TRG
  • Stiller Tactical
  • X-Treme
  • Savage
  • Tika T3
  • McMillan
  • Surgeon 591, 1086 and 1581
  • Savage
  • Defiance Rebel
  • Remington 700
  • PGW Defence Technology Inc

Visit Remington, Visit Cadex Defence

Remington RACS | Remington Accessory Chassis System

Remington RACS | Remington Accessory Chassis System

Save

MDT ESS CHASSIS SYSTEM | MDT RIFLE STOCK

by | Mar 27, 2017 | Rifle Chassis System, Modular Driven Technologies | 0 comments

MDT ESS Chassis Installed on a Rifle

The ESS Chassis retains the MDT proven V-block bedding system to form a solid and reliable base for the rifle action. The magazine well has been refined for easy insertion of the magazine, while reducing rattle and movement. The tab style magazine release has been replaced with a semi-flush ambidextrous paddle that can easily be activated by a weak or strong hand. The recoil lug mortise has been designed to accommodate most aftermarket recoil lugs and the trigger area will accommodate most aftermarket triggers.

MDT ESS Chassis System

MDT ESS Chassis System

A serrated barricade stop has been added to the front of the magazine well and a polymer fore-end grip at the balance point adds comfort. The wide fore-grip area combined with the octagonal profiled for-end tube offers flexible options when shooting over bags or improvised rests. Thumb shelves have been added to both side of the chassis for shooters who prefer an open grip.

MDT ESS Chassis System Grip

MDT ESS Chassis System Grip

The most significant change is the incorporation of the ESS specific butt-stock interface, rather than the traditional AR pattern interface.  This allows us to place the pistol grip in optimum relation to the trigger, while still allowing the shooter to choose from the wide variety of AR pattern pistol grips which suit their preference.

MDT ESS Chassis Stock – The MDT ESS chassis comes with it’s own butt-stock, similar to our Skeleton Rifle Stock. It is fully adjustable including lateral adjustment for the butt-pad and the cheek rest.  Cheek rest height and butt-pad length-of-pull are adjustable by thumb wheels.

MDT ESS Chassis Stock

MDT ESS Chassis Stock

MDT ESS Chassis Stock Cheek Riser

MDT ESS Chassis Stock Cheek Riser

A butt-stock with an integrated folder will be introduced soon as well as an M4 carbine buffer tube adapter by Fall 2017.

MDT ESS Fore-End – Fore-Ends are offered in 3 different lengths, 12″, 15″ and 18″, can be ordered with a full rail, partial rail, or no rail with cut-outs to allow low scope mounting. Each fore-end comes with M-Lok slots and QD flush cup mounts.

Action specific scope mounting rails which co-index with the fore-end rail are available as an accessory.

MDT ESS Chassis Mounting And Compatible Accessories

The MDT ESS chassis is designed with it’s own butt-stock for perfect ergonomics and is designed to use AR15 style pistol grips (purchased separately), and allows for customization with a wide variety of accessories. The Fore-End comes in 3 different lengths, and can be ordered with a full rail, partial rail or no rail.

MDT ESS Chassis System Rail Mounting Options

MDT ESS Chassis System Rail Mounting Options

MDT ESS Chassis System Specifications

  • Weight: Chassis: 1.6lb, Fore-end: 0.6lb – 1lb, Butt-stock: 2lb.
  • Length of Pull: 13.4″ – 14.4″ (Based on Remington 700).
  • Ambidextrous, easy reach magazine latch – can be operated with trigger finger or left hand.
  • Extra large magazine well for easy mag insertion/removal.
  • Barricade stop in front of magazine to prevent putting pressure on the magazine.
  • Angled front profile with hand grip for minute vertical adjustments and comfort/protection from the elements.
  • Thumb rests on both sides of the chassis.
  • Wide front profile for extra comfort / stability when resting on flat surfaces.
  • Stock height at comb and heel – 0.5” below bore centerline.  1.0” of riser adjustability.
  • Allows for barrel contours up to 1.300” straight taper.
  • Accepts AICS pattern magazines for both short and long action. (3.715” long action)
  • Accepts aftermarket lugs up to 0.375 thick and tapered
  • Compatible with all non-beavertail AR pattern pistol grips.  Beavertail grips will fit with minor trimming.
  • CNC machined from Aircraft grade Aluminum, and finished with H-series Cerakote.  Cheek-piece, fore-grip, and butt-pad constructed of composites.

What You Get And What You’ll Need

The ESS Chassis System comes complete with a chassis, butt stock, and a fore-end. All hardware is included. You will need Allen keys to assemble and install on your rifle.

In addition to the MDT ESS Chassis, you will need;

  • An AR-15 pattern pistol grip. Grips with a beavertail will require minor fitting.
  • An AICS pattern magazine appropriate for the rifle chambering.

MDT ESS Dimensions

MDT ESS Chassis Dimensions

MDT ESS Chassis Dimensions

Save

Save

Save

Save

Click To See More Tactical Modular Rifles
MDT TAC21 Price

Save

Save

Save

Save

CADEX KRAKEN | CADEX CDX-MC KRAKEN

by | Mar 1, 2017 | Cadex, Cadex Defence Rifles | 0 comments

CADEX KRAKEN-CADEX CDX-MC KRAKEN
Click To See More Tactical Modular Rifles

Im not one to let appearances of a firearm influence me. At least I thought that was the case until I learned of the Cadex Kraken officially named Cadex CDX-MC Kraken. The Kraken looks as good in it’s physical form as it does on paper. I will own this rifle.

CADEX DEFENCE KRAKEN MULTI-CALIBER RIFLES – CDX-MC KRAKEN

The new Cadex Kraken (Cadex Defence CDX-MC Kraken), is a multi-caliber rifle using an innovative (patent pending) barrel change system. This system is the only true no point of impact change between take-down and reassembly of the same barrel. Cadex Kraken is using traditional barrel to action threading system while incorporating a special tool designed to unscrew and torque its barrel from the breech side.

CADEX KRAKEN SPECIFICATIONS

  • Muzzle Brake Ready – The Cadex Kraken is ready to accommodate a muzzle brake or suppressor.
  • V-Shaped Bedding System – Provides a stable platform that eliminates any movement of the action in the Cadex Chassis System.
  • Mirage Control Tube – Reduces image distortion from barrel heat.
  • Cadex Kraken Receiver
  • Bolt – 3 lug bolt with 60 degree bolt throw.
  • Bolt Knobs – A: Oversized cross hatch bolt knob (0.850″ x 2.625″), B: Grooved tactical knob (0.730″ x 2.8″), C: Knurled tactical knob (0.730″ x 2.8″), D: Rounded knob (0.981″ x 2.7″)
  • Barrel – In order for Cadex to offer the best extreme long range sub-MOA precision rifle, we selected Bartlein Barrels for the Kraken. Teamed with our Cadex designed 1.300” heavy barrel straight taper with barrel band and threaded muzzle for slip on suppressor or muzzle brake. All Cadex Kraken barrels are Match Grade, Single Point cut, 5R rifling with an optimized twist rate.
  • Recoil Lug – Heavy duty recoil lug
  • Trigger Options – Cadex DX1 Single Stage Trigger: The Cadex DX1 trigger is a single stage trigger adjustable about 1.5 to 5 lbs. It features an adjustable trigger shoe to improve ergonomics. Cadex DX2 Double Stage Trigger: The Cadex DX2 trigger is a double stage trigger adjustable about 2 to 5 lbs. Both stages can be adjusted separately. It features an adjustable trigger shoe to improve ergonomics.
  • Folding Butt Stock – Reverse folding butt stock offers bolt handle protection and ultra compact transport.
  • Locking Mechanism – Rattle free locking mechanism. Easy manipulation with gloves.
  • Folding Hinge – Offset cam to remove any free play
  • Tool Free Adjustable Butt Pad
  • Tool Free Adjustable Length of Pull
  • Tool Free Adjustable Cheek Rest
  • Full Length Dual Top Rail – The Cadex Kraken features a full length dual top rail. Available in 20 MOA, 30 MOA, or 45 MOA depending on the model.
  • Magazine Sleeve – Multiple magazine sleeves are available to fit most magazine types on the market.
  • Detachable Base – Removable for trigger maintenance or tuning without need to remove your action and lose your zero.
  • Pistol Grip – Finger grooved rubberized Ergo grip.
  • Trigger Guard – Oversized trigger guard and magazine release for easy manipulation with gloves.
MDT TAC21 Price

GRS BOLTHORN CHASSIS | GRS STOCKS

by | Mar 1, 2017 | Rifle Chassis System, GRS | 0 comments

GRS Bolthorn Chassis-GRS Bolthorn Stock

GRS STOCKS BOLTHORN RIFLE CHASSIS SYSTEM

In 2012 straight from Norway Tikkashooters.com began importing GRS Stocks. The introduction was met with typical groans of expensive and ugly. Undeterred GRS stayed the course made some changes to appease American long range rifle shooters. I think the GRS laminated stocks are some of the best looking in their class. I also think the GRS Bolthorn Chassis System is butt ugly. Remember though form must follow function.This quote to me speaks of the quality and attention to detail.

The balance of this stock is superb. This is proven by being able to balance a fully equipped rifle on its muzzle.

The ultimate in long-range prone shooting, the GRS Bolthorn Chassis is superbly balanced and featured. With GRS Stocks advanced understanding of recoil management, the GRS Bolthorn keeps the line of recoil as close to the core line of the barrel as possible, resulting in unsurpassed recoil absorption and greater accuracy.

Fully equipped with rails, sling mounts, magazine and GRS’ well-known adjustability of cheek-piece, length of pull, and height of recoil pad, the GRS Bolthorn comes ready-to-go as an advanced shooting platform.

GRS Bolthorn Chassis System

GRS Bolthorn Rifle Chassis System

GRS Bolthorn Chassis For Sale

The GRS Bolthorn Chassis is made for long range prone shooting. They are all made in hard anodized T6 6082 aluminum with composite grips and side panels.
The balance of this stock is superb. This is proven by being able to balance a fully equipped rifle on its muzzle.

The stock is designed so the line of the recoil is as close to the core line of the barrel as possible. this means excellent recoil absorption and greater accuracy.

The Bolthorn Chassis comes fully equipped from GRS with all rails, sling mounts, either a 5 or 10 round magazine (Accuracy International AICS compatible magazine well) and of course or famous adjustability on length of pull, cheek piece and height of the recoil pad, all done with a touch of a button.

The grip is fixed on a rail, so you can adjust the distance from the grip to the trigger, giving perfect finger placement.

In most cases it is a matter of dropping the action into the stock and torque up the action screws, then off to the range. (Howa needs a light change on the action to fit the Accuracy International magazines)

The GRS Bolthorn Chassis is available inlets are as follows:

  • SSG 3000/ Sauer 200 STR
  • Tikka T3 SA
  • Tikka T3 LA
  • Howa/ Weatherby Vanguard SA
  • Remington 700  SA
  • Remington 700 LA

  GRS BOLTHORN CHASSIS INLETS

                  GRS STOCKS Product Code Model and Inlet EAN 13

  • 102923, GRS Bolthorn F, Rem 700 BDL LA, 300WinMag, 7072171029237
  • 102922, GRS Bolthorn F, Rem 700 BDL SA, 308, 7072171029220
  • 102920, GRS Bolthorn F, Howa SA, 223, 7072171029206
  • 102919, GRS Bolthorn F, Howa SA, 308, 7072171029190
  • 102916, GRS Bolthorn F, Tikka T3 LA, 30-08, 7072171029169
  • 102915, GRS Bolthorn F, Tikka T3 LA, 300 WinMag, 7072171029152
  • 102910, GRS Bolthorn F, Tikka T3, 223, 7072171029107
  • 102909, GRS Bolthorn F, Tikka T3, 308, 7072171029091
  • 102908, GRS Bolthorn F, SSG 3000, 7072171029084
  • 102907, GRS Bolthorn F, Sauer 200 STR, 7072171029077

GRS BOLTHORN CHASSIS SPECIFICATIONS

  • Body made in hard anodized 6082 T6 aluminum.
  • Hinge is made in 304 stainless steel (extra option)
  • Composite grip and side panels.
  • 0.5″ Limbsaver GRS recoil pad.
  • SpeedLock adjustment system.
  • LOP 35.5-38.3 cm.
  • Total length 78 cm
  • Fore end width 56 mm
  • 28 mm adjustment LOP and cheek-piece.
  • Height adjustable recoil pad included.
  • Flush cup sling mounts on all 4 picatinny rails in front and both sides of the rear stock.
  • Picatinny rail on rear stock.
  • Flush cup sling mounts included.
  • Total length 79 cm
  • Weighs 1850-2000 grams depending on model
  • SSG 3000 model is made to fit original magazines
  • The T3 SA stock comes with one 10 round Polymer magazine in either .308 Winchester  (also fits 243, 260 and 22-250) or 223 Remington (also fits 222).
    The magazine well also fits for the standard 3.050″ (78mm) 5 and 10 shot AI magazines
  • The T3 LA comes with one 5 round single stack metal magazine in either 300Winchester magnum (also fits 7mm rem mag) and 30.06 Springfield (also fits 6.5×55 Swedish Mauser)

Torque recommendations: Rear screw 5nm, Front screw 5nm

MDT TAC21 Price

ACCURACY INTERNATIONAL AXMC | AI AXMC

by | Feb 20, 2017 | Accuracy International Rifles, Precision Rifles | 0 comments

Accuracy International AI AXMC-AICS AXMC

AI AXMC SNIPER RIFLE

AI AXMC: The latest in a long and distinguished line of combat proven sniper rifles, the AX series comprises the stand-alone AI AX308 (.308 Win) and the multi caliber AI AXMC, a .338 Lap Mag which can be reconfigured to .300 Win Mag or.308 Win in minutes simply by changing the barrel, bolt and magazine/insert.

AI AXMC BASE RIFLE: Right side folding stock over bolt, adjustable cheek piece, adjustable butt pad with spacers, pistol grip, flush cup sling attachment points, 30MOA STANAG 4694/Mil Std 1913 action rail and 16” forend tube and rail, double chamber standard muzzle brake, 1 x 140mm plain accessory rail, 2 x 80mm flush cup accessory rails, user manual, 1 x 10 round double stack CIP magazine.

AI AXMC CALIBERS .338 Lapua / .300 Win mag, WEIGHT: 6.8Kg (15lb) (standard rail setup, empty magazine, no scope, 27” barrel, tactical muzzle brake)

Accuracy International AXMC DIMENSIONS

Full length: 1250mm x 185mm x 100mm, Stock folded: 1040mm x 185mm x 105mm with 27” barrel, tactical muzzle brake

ACCURACY INTERNATIONAL AXMC COLOR COATINGS

All Accuracy International AX Rifles now benefit from a choice of industry leading CERAKOTE ceramic polymer firearm coatings. High performance H-Series in three unique AI colors: DARK EARTH, GREEN, PALE BROWN. Ultra high performance Elite Series for unrivaled durability: ELITE SAND, ELITE MIDNIGHT.

AI AXMC OPTIONS: Tactical threaded double chamber muzzle brake for AI suppressor

ACCURACY INTERNATIONAL AXMC ACCESSORIES

  • STANAG 4694 / Mil std 1913 accessory rails to attach to AI’s patented KeySlot™ mounting system
  • AI bipod and Harris bipod mounts
  • Bipods
  • Handstop with sling loop and Flush cup
  • Rear butt spike
  • Suppressor
  • Slings
  • Cleaning kits
  • Transit cases

Note: Accuracy International is frequently referred to with the acronym “AICS“. That is incorrect. AICS is the acronym for “Accuracy International Chassis Systems“. The correct acronym for Accuracy International is “AI“.

 

AI AXMC User Manual
AI AXMC Datasheet
Click To See More Tactical Modular Rifles
MDT TAC21 Price

IWI DAN 338 | Israel Weapon Industries DAN 338 Lapua

by | Feb 20, 2017 | Precision Rifles, Israel Weapon Industries | 0 comments

Israel Weapon Industries IWI DAN 338 Lapua

Introducing the IWI DAN 338!

IWI DAN 338 Where Bolt Action Meets Precision and Strength

Israeli’s have been protecting themselves from enemies probably longer than any other people in history. Because of these they have also designed and fielded some of the best weapons on the globe. From Tanks to Tavor’s Israel knows how to make weapons. IWI best known to American shooters for the Tavor is finally making the DAN .338 Bolt Action Sniper Rifle available in the United States.

The IWI DAN 338 Bolt Action Sniper Rifle, renowned for its outstanding strength, has been designed to reach a perfect aim-and-shoot during the first round.

The sniper was developed in collaboration with the Elite Units of Israel Defense Forces (IDF) following years of battlefield experience. Together they built the ultimate bolt action sniper rifle specifically for military and police organizations and law enforcement agencies worldwide.

In true IWI tradition, the innovative Israel Weapon Industries DAN 338 Bolt Action Sniper Rifle displays state-of-the-art human engineering and exceptional reliability even in the harshest weather conditions.

Chambered in .338 LAPUA Magnum ammunition, the IWI DAN 338 Bolt Action Sniper Rifle demonstrates outstanding accuracy for long distances of more than 1200m. A fast interchangeable barrel can be easily changed without tailored tools. It features a 10 round, drop free magazine with an ambidextrous magazine release and ambidextrous safety.

The IWI DAN 338 Bolt Action Sniper Rifle has been tested in adverse and extreme environments and demonstrates excellent performance with high precision accuracy, reliability and enhanced human ergonomics.

IWI DAN 338 ADVANTAGES AND BENEFITS

  • Adjustable bipod
  • Adjustable cheek rest
  • Lightweight foldable butt stock with adjustable Length of Pull
  • Foldable and adjustable mono-pod
  • Quick screw-on suppressor (optional feature)
  • Heavy fluted free floating barrel

IWI DAN 338 Features

  • Quick interchangeable barrel without special tools
  • Incomparably accurate high-precision Sniper Rifle
  • Sub MOA accuracy
  • 10 round, drop-free magazine
  • Ambidextrous safety and magazine release
  • Two stage adjustable trigger
  • Aluminum alloy modular chassis
  • MIL-STD 1913 (Picatinny) Rails at 3, 6, 9 & 12 o’clock positions for mounting accessories and devices
Click To See More Tactical Modular Rifles
MDT TAC21 Price