J.Allen JAE 700 Rifle Chassis System

by | Jun 3, 2017 | J.Allen Chassis, Blog Posts, Rifle Chassis System | 0 comments

J.Allen JAE 700 Rifle Chassis System
J.Allen JAE 700 Rifle Chassis System Olive Drab JAE-700-R-RAILED-OD-SA

J.Allen JAE 700 Rifle Chassis System

The precision rifle world is awash in slick and high quality gear, but no chassis is more beautifully made or offers the features of the J. Allen Enterprises JAE 700 chassis. The most compelling feature is the adjustable magazine retention system that allows the shooter to bounce back and forth between AICS pattern and AW (Arctic Warfare) magazines. No chassis will better pair the AW double-stack magazine with a two-lug action than the JAE 700.

See Alternative Rifle Chassis

J.Allen JAE 700 Rifle Chassis System

J.Allen JAE 700 Rifle Chassis System Built-in Magwell that can be adjusted for fit and feed of the magazines (no other bottom metal needed; magazine not included). Adjustable Thumbwheel Cheekrest and QD lever to quickly remove Cheekrest for cleaning from the breech and removing the bolt.

J.Allen JAE 700 Rifle Chassis System Details
  • Full Length Aluminum Skeleton
  • Painted Composite Skins Permanently Bonded to Aluminum Skeleton
  • Patent Pending Cage and Adjustable Magazine Collet System (in either Short Action or Long Action)
  • Hardened Steel Insert for Recoil Lug (full surface to surface contact)
  • Integral Trigger Guard
  • Adjustable paddle (for adjusting fit/feed of magazine)
  • Captured Action Screws to bolt down receiver (65 inch lbs of torque recommended)
  • Rubber Grip
  • Flush mount Rail-European style
  • Cup mounts and Flush Cups (3 positions on each side of stock for attaching QD swivels for sling)
  • Adjustable Thumbwheel Cheek Rest w/ QD Mechanism (includes lever to remove cheek rest to remove bolt and clean with a rod from the breech)
  • Bottom 2″ Picatinny Rail (can be repositioned in several locations on Flush mount rail)
  • Bipod Adapter w/Swivel Stud (can be repositioned in several locations on Flush mount rail)
  • Off Hand Rest w/integral Picatinny Rail
  • Rubber Butt Pad (LOP can be adjusted by adding Butt Spacers which are sold separately)
  • Adjustable Palm Rest w/Spacers

Other Content of Interest|

| MDT Tac21 Suppressed | Modular Rifles | Ruger Precision Rifle | Rifle Chassis Systems |

MDT TAC21 Price

Ashbury Precision Ordnance Saber Forsst Rifle Chassis

by | May 13, 2017 | Ashbury Precision Ordnance Chassis, Rifle Chassis System | 0 comments

Ashbury Precision Ordnance Saber Forsst Rifle Chassis

The SABER®-FORSST® (folding rifle stock system tactical) Modular Rifle Chassis system was conceived in 2004 as a way to advance the functionality of modern bolt action rifles for tactical, competition, target and hunting applications. After more than seven years of intensive development, countless hours of engineering design, prototyping and testing; with input from experienced snipers, world champion competitive rifle shooters, and hunters Ashbury has to date been awarded 14 utility and design patents, with additional patents pending!

Ashbury Precision Ordnance Saber Forsst Rifle Chassis Infographic

Ashbury Precision Ordnance Saber-Forsst Rifle Chassis Features

Ashbury Precision Ordnance Saber Forsst Rifle Chassis Mod 1

SABER modular rifle chassis are manufactured to ISO:9001-2008 standards principally from 7075-T6 aerospace grade alloys, advanced composites and lightweight high-strength carbon fiber materials. SABER® chassis’ are truly modular and designed to provide users with greater functionality and increased accuracy when installed on many popular right and left hand bolt action receivers.

Customers frequently comment about the adjustable ergonomic design which is singularly unique when compared to a traditional rifle stock and contributes to reducing felt recoil. These features allow shooters better control, shot follow through and enhanced long range accuracy across the entire caliber range from small to large caliber including the 50 BMG. You can upgrade nearly any sub-assembly and most individual components of the chassis using a common family of accessories on your home workbench or with the assistance of a trusted gunsmith. SABER®-FORSST® Modular by Definition…Performance Engineered by Design proudly Made in America

Modular by Definition…Performance Engineered by Design. The patented unitized monolithic top rail, ergonomic push button adjustable hybrid folding shoulder stock, Quattro carbon fiber co-bore aligned forend and completely modular design highlights the MOD-1. MOD-1 SABER chassis are precision manufactured in compliance with ISO:9001-2008 standards from aerospace grade alloys, advanced composites and super-strong carbon fiber materials. SABER® MOD-1 modular rifle chassis are designed for many popular right and left hand bolt action receivers using detachable 5 and 10rd magazines. SABER MOD-1 installation may require a gunsmith for selected barreled actions for precision fitting.

Ashbury Precision Ordnance Saber Forsst Rifle Chassis Mod 1 – Shoulder Stock

  • Fully Adjustable Shoulder Stock Ergonomics
  • Folding Hinge or Detachable
  • Tool-Less
  • Limbsaver® Recoil Pad
  • Standard Butt Hook w/optional Interchangeable Monopod
  • Integral Flushcup Sling Swivel Points
  • Comfortable for Right or Left Hand Shooting

Ashbury Precision Ordnance Saber Forsst Rifle Chassis Mod 1 – Center Chassis Section

  • Modularly Interchangeable (short, long and XL)
  • A1-5rd, A2-10rd and A3 5/10rd
  • Variable Angle Grip Adapters
  • MAGPUL® Hand Grip
  • Grip to Trigger Distance Adjustment
  • Paddle Lever Magazine Release optional Ambi-TG

Ashbury Precision Ordnance Saber Forsst Rifle Chassis Mod 1- Quattro Forend

  • Unitized Monolithic Rail in 0, 20, 30, 40 and 60 MOA MIL-STD 1913 rail
  • Re-Locatable MIL-STD 1913 Accessory Rails: standard 12˝, 4˝ also with Flushcup Sling Swivel Inserts
  • Ergonomically designed for precision shooting
  • High strength alloy, composites and carbon fiber construction
  • “Bedding-less” action interface technology
  • Right and left hand standard models
  • PBA-H Shoulder Stock w/adjustable cheekpiece, length of pull (LOP), vertical recoil pad position, grip to trigger distance and optional adjustable field Monopod
  • Unitized 20MOA / 30MOA Monolithic Rail
  • Quattro forend “co-bore aligned” MIL-STD 1913 accessory rails
  • User maintainable with SABER® Field Multi-Tool
  • Durable MIL-STD 810G corrosion resistant protective finishes
  • SABER® Electro-Optic scope rings 30mm, 34mm, 35mm (optional)
  • Weight: 6.3 lbs (approx.)
  • Colors: Black. Optional special order Flat Dark Earth, OD Green and Nordic Gray
  • Models Available For The Following Bolt Action Receivers:
    • HS Precision Pro-Series 2000 L/A
    • McMillan G30 S/A, L/A and 50BMG
    • Remington 700 S/A and L/A
    • SAKO TRG-42
    • Savage 110
    • More under development!

Ashbury Precision Ordnance Saber Forsst Rifle Chassis Mod 0

Inspired design with modularity, ergonomic fit, versatility and accuracy in mind! The SABER MOD-0 provides users with a highly accurate “drop-in torque down” solution to upgrade a favored rifle or custom build. MOD-0 SABER rifle chassis are manufactured in compliance with ISO:9001-2008 standards from aerospace grade alloys, advanced composites, super-strong carbon fiber materials. The MOD-0 is simple to install and designed to accommodate existing two-piece and many one-piece receiver scope bases requiring no special tools. SABER MOD-0 provides users with a fully adjustable fixed length shoulder stock, configurations for many popular right and left hand rifle action manufacturers and a Quattro carbon fiber forend with top and bottom accessory rail positions.

Ashbury Precision Ordnance Saber-Forsst Rifle Chassis Mod 0 – Shoulder Stock

  • Fully Adjustable Shoulder Stock Ergonomics
  • Fixed
  • Hand Tool Adjustable (HTA)
  • Limbsaver® Recoil Pad
  • Standard Butt Hook w/optional Interchangeable Monopod
  • Integral Flushcup Sling Swivel Points
  • Comfortable for Right or Left Hand Shooting

 

Ashbury Precision Ordnance Saber-Forsst Rifle Chassis Mod 0 – Center Chassis Section

  • Modularly Interchangeable (short, long and XL)
  • A1-5rd, A2-10rd and A3 5/10rd
  • Variable Angle Grip Adapters
  • MAGPUL® Hand Grip
  • Grip to Trigger Distance Adjustment
  • Paddle Lever Magazine Release optional Ambi-TG

 

Ashbury Precision Ordnance Saber-Forsst Rifle Chassis Mod 0 – Quattro Forend

  • MOD-0 uses existing receiver scope base w/ 4” top and bottom rails and no side rails
  • Re-Locatable MIL-STD 1913 Accessory Rails: standard 12˝, 4˝ also with Flushcup Sling Swivel Inserts
  • Completely modular rifle chassis system
  • Ergonomically designed for precision shooting
  • High strength alloy, composites and carbon fiber construction
  • “Bedding-less” action interface technology
  • Right and left hand models are standard
  • Adjustable cheekpiece, length of pull (LOP), recoil pad position, grip to trigger distance and optional Monopod position and height
  • Quattro forend “co-bore aligned” MIL-STD
  • 1913 side rails
  • Interchangeable components and sub-assemblies
  • New modern SPORTER rifle chassis with adjustable shoulder stock, box magazine,
    and traditional style forend
  • Completely user maintainable in the field with SABER® Field Multi-Tool
  • SABER® Electro-Optic scope rings 30mm, 34mm, 35mm
  • Durable corrosion resistant protective finishes
  • Weight: 5.75 lbs (approx.)
  • Colors: Black. Optional special order Flat Dark Earth, OD Green and Gray
  • Models Available For The Following Bolt Action Receivers:
    • GA Precision Templar S/A
    • McMillan G30 S/A, L/A
    • Rem700 S/A and L/A
    • Surgeon RSR, 591, 1086, 1581

Ashbury Precision Ordnance Saber Forsst Rifle Chassis Sporter

Contemporary modularity using shoulder stock and center chassis section components from the patented SABER-FORSST chassis design, transition the standard MOD-0 into a more “traditional” looking rifle for a variety of shooting sports. SPORTER rifle chassis are manufactured in compliance with ISO: 9001-2008 standards from aerospace grade alloys, and advanced composite materials providing a light weight next generation hunting and sporting platform. The SPORTER is designed to use common two-piece scope bases for ease of installation requiring no special tools. The SPORTER chassis provides users with a fully adjustable fixed length shoulder stock, configurations for many popular right and left hand rifle action manufacturers and a sleek free floating composite forend. The standard color is black.

SABER-FORSST Rifle Chassis – Sporter Shoulder Stock

  • Hand Tool Adjustable Shoulder Stock Ergonomics
  • Fixed
  • Limbsaver® Recoil Pad
  • Standard Butt Hook w/optional Interchangeable Monopod
  • Integral Flushcup Sling Swivel Points
  • Comfortable for Right or Left Hand Shooting

 SABER-FORSST Rifle Chassis – Sporter Center Chassis Section

  • Modularly Interchangeable (short, long and XL)
  • A1-5rd or A3 5/10rd
  • Variable Angle Grip Adapters
  • MAGPUL® Hand Grip
  • Grip to Trigger Distance Adjustment
  • Paddle Lever Magazine Release optional Ambi-TG

SABER-FORSST Rifle Chassis – Sporter Forend

  • Traditional sporter rifle styling
  • Sling swivel stud
  • Lightweight carbon fiber design
  • Completely modular rifle chassis system
  • Ergonomically designed for precision shooting
  • High strength alloy, composites and carbon fiber construction
  • “Bedding-less” action interface technology
  • Right and left hand models are standard
  • Adjustable cheekpiece, length of pull (LOP), recoil pad position, grip to trigger distance and optional Monopod position and height
  • Interchangeable components and sub-assemblies
  • New modern SPORTER rifle chassis with adjustable shoulder stock, box magazine,
    and traditional style forend
  • Completely user maintainable in the field with SABER® Field Multi-Tool
  • Durable corrosion resistant protective finishes
  • Weight: 4.5 lbs (approx.)
  • Colors: Black
  • Models Available For The Following Bolt Action Receivers:
    • McMillan G30 S/A, L/A
    • Rem700 S/A and L/A
    • Surgeon RSR, 591, 1086, 1581

Ashbury Precision Ordnance Product ShowcaseAshbury Precision Ordnance SABER-FORSST Chassis

Save

Save

Save

Click To See More Tactical Modular Rifles
MDT TAC21 Price

Save

Save

Save

Accurate Mag Chassis System | Sport-Tact Chassis

by | May 11, 2017 | Rifle Chassis System, Accurate Mag | 0 comments

Accurate Mag Sport Tact Chassis System

Accurate Mag Chassis Systems have been designed and produced with high precision CAD/CAM programs and CNC machinery to high quality Military standards. All chassis systems are made out 6061-T6 aircraft grade aluminum for lightness with some high stress or high wear parts made out of steel. All aluminum parts are given a military grade Hard-anodize finish, the same process that is done to M4 upper and lower receivers. And, all steel parts either have a black oxide or a cerakote finish.

See the Kimber Advanced Tactical SOC Featuring Accurate Mag Chassis

Accurate Mag Sport-Tact Remington 700 LA Chassis

Accurate-Mag Sport-Tact Remington 700 LA Chassis is a complete stock system, ready for installation.  Existing barreled action can be removed from current stocks, and simply bolted into the Sport-Tact Chassis.  Included on the chassis is an adjustable stock, which has a variable LOP, from 13 to 15.75″.  The cheek-piece can also be adjusted fore & aft, as well as up & down.  Front handguard includes side and bottom picatinny rails, while providing plenty of room to free-float a barrel.  Chassis is machined from aluminum, allowing for rigid mounting of your action.  AR-15 style pistol grip is included.  Long Action Chassis includes 5rd 300 Win Mag magazine.  Accepts Accurate-Mag double stack detachable magazines or AICS magazines.

SPECS: Fits – Long Action Remington 700 rifles.  Includes 5rd magazines (LA 300 Win Mag).  Construction – Aluminum.  Finish – Matte black anodizing.  Includes AR-15 grip.  Adjustable stock, for LOP and cheekweld.

Accurate Mag Sport-Tact Remington 700 SA Chassis

Accurate-Mag Sport-Tact Remington 700 SA Chassis is a complete stock system, ready for installation.  Existing barreled action can be removed from current stocks, and simply bolted into the Sport-Tact Chassis.  Included on the chassis is an adjustable stock, which has a variable LOP, from 13 to 15.75″.  The cheek-piece can also be adjusted fore & aft, as well as up & down.  Front handguard includes side and bottom picatinny rails, while providing plenty of room to free-float a barrel.  Chassis is machined from aluminum, allowing for rigid mounting of your action.  AR-15 style pistol grip is included.  Short Action Chassis includes 5rd 308 magazine.  Accepts Accurate-Mag double stack detachable magazines or AICS magazines.

SPECS: Fits – Short Action Remington 700 rifles.  Includes 5rd magazines (SA 308 Mag).  Construction – Aluminum.  Finish – Matte black anodizing.  Includes AR-15 grip.  Adjustable stock, for LOP and cheekweld.

Accurate Mag Sport-Tact Hunter Chassis

The Sport-Tact Hunter Chassis is the definition of a modular SPORTING TACTICAL rifle stock. It combines all of the precision features of our machined center section with hard bedding and DBM feeding system in a classic look of a traditional rifle with  walnut Butt-stock and for-end. The complete rifle stock ways 4.8lbs and really helps tame magnum rifles with stocks that are to light.

The for-end carries a “T” – slot rail for sling or Bi-Pod mounting and has a unique shape that can be used with bags or help level the rifle in a tree stand, the butt-stock is a tapered Mauser cut the self adjusts to any shooter’s mount. Comes with a KICK-EEZ recoil pad at 14” LOP. Ordered in Savage or Remington SA & LA center sections. The walnut Hunter rifle stock is a premium upgrade for your favorite Savage or Remington rifle.

Accurate Mag Sport-Tact Multi-Caliber Rifle System

The SporT-Tact line also offers a Multi-Caliber Rifle System that allows mix and match of several calibers into any desired system required.  We refer to these as “Insert Rifles”; unlike other multi-Caliber systems the SporT-Tact multi-caliber can be changed in less than one minute with NO head space check or barrel separation from the receiver; all mechanicals and ergonomic stock considerations are kept separate from each other.

Our current system included a semi-automatic M14, 308 Precision Bolt Rifle with 17” barrel and a 338 Norma Suppressed Precision Bolt Rifle with a 27” barrel. All three insert rifles fit the common chassis and scope system and can be carried in a case 30” in length.

The patented trunnion pin & plate system assures exact zero-retention of any insert rifle. The large chassis opening can even house some semi-automatic rifles offered today including gas piston M4/AR-15 rifles and M14 rifles. Butt-Stock and For-End treatments will be introduced over the year following the systems release and will offer several themes from target through tactical including complete wood systems for a traditional hunting rifle approach.

The Multi-Caliber Rifle System allows mix and match of several calibers into any desired system required.

The insert rifle employs a dedicated action block to its receiver and barrel and has common trunnion mounting to the center section opening. The system will be offered as a commercial chassis for Remington and Savage Rifles that will allow you to immediately upgrade your existing rifle battery or create your own personal Multi-Caliber System.

The MULTI-CALIBER Rifle chassis system can be built for Savage and Remington rifles as well as the M14 with a myriad of options.

Accurate Mag Sport-Tact Chassis System

The SporT-Tact line of sporting tactical rifle chassis has been developed from Military requirements and the needs of long range hunting enthusiasts. The approach to the design of the chassis line was to keep the three major component groups completely modular (Butt-Stock, Center Section and For-End) to allow a mix and match scenario to satisfy any solicitation or sporting requirement.

The corner stone component of the sport-tact Chassis system is the dedicated center section in either short or long action. Currently we offer these for Remington and Savage based systems. Matched with current offerings of AM Products cartridge magazines.

Very Simply you can build your own chassis system by selecting the desired butt-stock, center section and fore-end from the option described before and shown to the right and select a finish of either Black Hard Coat or Gun Kote Flat Dark Earth or Sand.

In addition to the center section options for most of the major rifle receivers, many fore-end and butt-stock options are available. Butt-Stock options include a fixed butt-stock machined from 6061-T6 aircraft grade aluminum and a folding butt-stock with aluminum frame covered with a plastic skin for a soft and warm feel. Folding stock models are available with and without a butt-spike. Fore-End options include a short, open top rail section with a full length bot-tom rail and movable rail segments on the sides. Also available is the Accurate-Mag tactical fore-end with full length top rail on top and either integrated picatinny rails machined into the front portion of the fore-end on the sides and bottom or with a Modular Rail System running the entire length of the sides and bottom.

ADVANCED LEVEL CHASSIS (Options Included)
Actions: SA or LA in SAV or REM
Butt-Stocks: Tactical Folding Butt-Stock with Butt-Spike
Fore-Ends: Tactical Fore-End with MRS
Colors: Gun Kote Finish

BASE LEVEL CHASSIS (Options Included)
Actions: SA or LA in SAV or REM
Butt-Stocks: Fixed Butt-Stock
Fore-Ends: Tri-Rail Fore-End
Colors: Black Finish

Click To See More Tactical Modular Rifles

REMINGTON RACS vs CADEX DUAL STRIKE

by | Apr 5, 2017 | Cadex, Rifle Chassis System | 0 comments

  1. Home
  2. Rifle Chassis System

Guide – Remington RACS versus Cadex Defence Dual Strike Rifle Chassis

Remington XM2010 RACS vs Cadex

Left:Remington XM2010 Features a RACS Chassis originally developed with Cadex Defence.

Right: The latest badass sniper rifle from Cadex Defence CDX Kraken

Remington XM2010 RACS vs Cadex

I always find it quite interesting as to what the predominant questions are that come from the contact pages at any of my websites. In the case of this website Modular Rifle I think all of the questions except for one have in one way or another pertained to The Remington RACS Chassis and variants used on the Remington Military Sniper Rifle XM2010 (currently known as the Remington M2010) and it’s visually similar but mechanically different siblings the Remington MSR, Remington PSR and the Remington CSR.

There’s is quite a bit of confusion about the Remington RACS and Cadex Chassis Systems which is completely understandable. Remington Military isn’t very forthcoming with information and Cadex Defence is evolving their modular rifle and chassis lineup with impressive speed.  Maybe we can sort some of it out with our guide below.

 

If you have additional information to improve this page please use the contact button below! Thanks.

Contact Us

Save

Save

Save

WHAT IS REMINGTON RACS?

Remington RACS vs Cadex Dual Strike

Remington RACS vs Cadex

What is Remington RACS?

RACS is the acronym for the Remington Military “Remington Accessory Chassis System” . The Remington RACS was developed by a joint effort between Remington Military and Cadex Defence.

The patent pending Remington Accessory Chassis System (RACS) incorporates state-of-the-art operator-defined attributes such as a free-float tubular design and a fully featured front handguard section. Operator selectable auxiliary rail sections in various lengths can be attached to any of the seven remaining facets of the octagonal handguard, which allows the operator to install clip-on in-line night vision systems. The folding RACS buttstock provides the operator with a wide variety of adjustments to allow setting the system to suit the shooter and the operating conditions.

Now the above all sounds good right? Remington also refers to the RACS as “Remington Arms Chassis System” The Remington Military website uses both variations. It took me a few minutes to realize the difference

Save

Are Remington Defence RACS the Same as Cadex Defence Chassis?

Observant shooters have noticed that the Remington RACS closely resembles Cadex Defense Chassis. This makes perfect sense. The Original Remington XM2010 was developed by a partnership between Remington Military and Cadex Defence.

What Cadex Chassis did the Remington XM2010 sniper rifle use? The Cadex Dual Strike is the closest match but not identical.

What’s Better Remington RACS or Cadex Dual Strike? Cadex has been upgrading the Dual Strike pretty regularly. At this time Cadex is on their 4th generation Dual Strike. Remington Military has made no publicly known changes to the RACS since release. While I can’t say first hand which is better but I will be putting my money down on the Cadex. The Cadex is also less expensive then the Remington.

Remington Defense Chassis System versus Remington Accessory Chassis System

Remington Defense Chassis System versus Remington Accessory Chassis System

The Remington Arms Chassis System refers to the Remington RACS on a complete Remington M2010/XM2010 ESR Enhanced Sniper Rifle when bought or fielded as a package.

The Remington Accessory Chassis System version of the RACS is how Remington Military refers to the RACS when purchased as an accessory and without a barreled action. Remington only list this as being available in sort action.

Now my take is the Remington Military website is simply out of date. EuroOptic list the RACS as being available in 300 Winchester Magnum, Remington 700 Long Action.

Save

 

MULTIPLE VERSIONS OF REMINGTON RACS

There are multiple versions of Remington RACS. The RACS chassis that is used in the XM2010, M2010 Sniper Rifle and the RACS chassis’s used in the Remington MSR, CSR and PSR Sniper Rifles.

Remington MSR, CSR and PSR RACS versus Cadex Chassis Systems

The Remington RACS Chassis in use on the Remington Defense Modular Sniper Rifle “MSR” and Remington Defense MK21 Precision Sniper Rifle “PSR” use a proprietary bolt action receiver and interchangeable barrels. This Remington RACS chassis in not compatible with any other receiver or barreled action. This RACS Chassis will not accept a Remington 700 receiver or barreled action.

Compatibility Guide – Remington RACS vs Cadex Chassis

The Remington RACS is only compatible with the Remington 700 and Remington 700 clone long and short actions. On the other hand the Cadex line of Chassis is compatible with the following brands of rifle actions (not all chassis, not all rifle models).

  • Sako TRG
  • Stiller Tactical
  • X-Treme
  • Savage
  • Tika T3
  • McMillan
  • Surgeon 591, 1086 and 1581
  • Savage
  • Defiance Rebel
  • Remington 700
  • PGW Defence Technology Inc

Visit Remington, Visit Cadex Defence

Remington RACS | Remington Accessory Chassis System

Remington RACS | Remington Accessory Chassis System

[pdf-embedder url=”https://modularrifle.com/wp-content/uploads/2017/04/Remington-RACS-Remington-Accessory-Chassis-System.pdf” title=”Remington RACS Remington Accessory Chassis System”]

Save

MDT ESS CHASSIS SYSTEM | MDT RIFLE STOCK

by | Mar 27, 2017 | Rifle Chassis System, Modular Driven Technologies | 0 comments

MDT ESS Chassis Installed on a Rifle

The ESS Chassis retains the MDT proven V-block bedding system to form a solid and reliable base for the rifle action. The magazine well has been refined for easy insertion of the magazine, while reducing rattle and movement. The tab style magazine release has been replaced with a semi-flush ambidextrous paddle that can easily be activated by a weak or strong hand. The recoil lug mortise has been designed to accommodate most aftermarket recoil lugs and the trigger area will accommodate most aftermarket triggers.

MDT ESS Chassis System

MDT ESS Chassis System

A serrated barricade stop has been added to the front of the magazine well and a polymer fore-end grip at the balance point adds comfort. The wide fore-grip area combined with the octagonal profiled for-end tube offers flexible options when shooting over bags or improvised rests. Thumb shelves have been added to both side of the chassis for shooters who prefer an open grip.

MDT ESS Chassis System Grip

MDT ESS Chassis System Grip

The most significant change is the incorporation of the ESS specific butt-stock interface, rather than the traditional AR pattern interface.  This allows us to place the pistol grip in optimum relation to the trigger, while still allowing the shooter to choose from the wide variety of AR pattern pistol grips which suit their preference.

MDT ESS Chassis Stock – The MDT ESS chassis comes with it’s own butt-stock, similar to our Skeleton Rifle Stock. It is fully adjustable including lateral adjustment for the butt-pad and the cheek rest.  Cheek rest height and butt-pad length-of-pull are adjustable by thumb wheels.

MDT ESS Chassis Stock

MDT ESS Chassis Stock

MDT ESS Chassis Stock Cheek Riser

MDT ESS Chassis Stock Cheek Riser

A butt-stock with an integrated folder will be introduced soon as well as an M4 carbine buffer tube adapter by Fall 2017.

MDT ESS Fore-End – Fore-Ends are offered in 3 different lengths, 12″, 15″ and 18″, can be ordered with a full rail, partial rail, or no rail with cut-outs to allow low scope mounting. Each fore-end comes with M-Lok slots and QD flush cup mounts.

Action specific scope mounting rails which co-index with the fore-end rail are available as an accessory.

MDT ESS Chassis Mounting And Compatible Accessories

The MDT ESS chassis is designed with it’s own butt-stock for perfect ergonomics and is designed to use AR15 style pistol grips (purchased separately), and allows for customization with a wide variety of accessories. The Fore-End comes in 3 different lengths, and can be ordered with a full rail, partial rail or no rail.

MDT ESS Chassis System Rail Mounting Options

MDT ESS Chassis System Rail Mounting Options

MDT ESS Chassis System Specifications

  • Weight: Chassis: 1.6lb, Fore-end: 0.6lb – 1lb, Butt-stock: 2lb.
  • Length of Pull: 13.4″ – 14.4″ (Based on Remington 700).
  • Ambidextrous, easy reach magazine latch – can be operated with trigger finger or left hand.
  • Extra large magazine well for easy mag insertion/removal.
  • Barricade stop in front of magazine to prevent putting pressure on the magazine.
  • Angled front profile with hand grip for minute vertical adjustments and comfort/protection from the elements.
  • Thumb rests on both sides of the chassis.
  • Wide front profile for extra comfort / stability when resting on flat surfaces.
  • Stock height at comb and heel – 0.5” below bore centerline.  1.0” of riser adjustability.
  • Allows for barrel contours up to 1.300” straight taper.
  • Accepts AICS pattern magazines for both short and long action. (3.715” long action)
  • Accepts aftermarket lugs up to 0.375 thick and tapered
  • Compatible with all non-beavertail AR pattern pistol grips.  Beavertail grips will fit with minor trimming.
  • CNC machined from Aircraft grade Aluminum, and finished with H-series Cerakote.  Cheek-piece, fore-grip, and butt-pad constructed of composites.

What You Get And What You’ll Need

The ESS Chassis System comes complete with a chassis, butt stock, and a fore-end. All hardware is included. You will need Allen keys to assemble and install on your rifle.

In addition to the MDT ESS Chassis, you will need;

  • An AR-15 pattern pistol grip. Grips with a beavertail will require minor fitting.
  • An AICS pattern magazine appropriate for the rifle chambering.

MDT ESS Dimensions

MDT ESS Chassis Dimensions

MDT ESS Chassis Dimensions

Save

Save

Save

Save

Click To See More Tactical Modular Rifles
MDT TAC21 Price

Save

Save

Save

Save

GRS BOLTHORN CHASSIS | GRS STOCKS

by | Mar 1, 2017 | Rifle Chassis System, GRS | 0 comments

GRS Bolthorn Chassis-GRS Bolthorn Stock

GRS STOCKS BOLTHORN RIFLE CHASSIS SYSTEM

In 2012 straight from Norway Tikkashooters.com began importing GRS Stocks. The introduction was met with typical groans of expensive and ugly. Undeterred GRS stayed the course made some changes to appease American long range rifle shooters. I think the GRS laminated stocks are some of the best looking in their class. I also think the GRS Bolthorn Chassis System is butt ugly. Remember though form must follow function.This quote to me speaks of the quality and attention to detail.

The balance of this stock is superb. This is proven by being able to balance a fully equipped rifle on its muzzle.

The ultimate in long-range prone shooting, the GRS Bolthorn Chassis is superbly balanced and featured. With GRS Stocks advanced understanding of recoil management, the GRS Bolthorn keeps the line of recoil as close to the core line of the barrel as possible, resulting in unsurpassed recoil absorption and greater accuracy.

Fully equipped with rails, sling mounts, magazine and GRS’ well-known adjustability of cheek-piece, length of pull, and height of recoil pad, the GRS Bolthorn comes ready-to-go as an advanced shooting platform.

GRS Bolthorn Chassis System

GRS Bolthorn Rifle Chassis System

GRS Bolthorn Chassis For Sale

The GRS Bolthorn Chassis is made for long range prone shooting. They are all made in hard anodized T6 6082 aluminum with composite grips and side panels.
The balance of this stock is superb. This is proven by being able to balance a fully equipped rifle on its muzzle.

The stock is designed so the line of the recoil is as close to the core line of the barrel as possible. this means excellent recoil absorption and greater accuracy.

The Bolthorn Chassis comes fully equipped from GRS with all rails, sling mounts, either a 5 or 10 round magazine (Accuracy International AICS compatible magazine well) and of course or famous adjustability on length of pull, cheek piece and height of the recoil pad, all done with a touch of a button.

The grip is fixed on a rail, so you can adjust the distance from the grip to the trigger, giving perfect finger placement.

In most cases it is a matter of dropping the action into the stock and torque up the action screws, then off to the range. (Howa needs a light change on the action to fit the Accuracy International magazines)

The GRS Bolthorn Chassis is available inlets are as follows:

  • SSG 3000/ Sauer 200 STR
  • Tikka T3 SA
  • Tikka T3 LA
  • Howa/ Weatherby Vanguard SA
  • Remington 700  SA
  • Remington 700 LA

  GRS BOLTHORN CHASSIS INLETS

                  GRS STOCKS Product Code Model and Inlet EAN 13

  • 102923, GRS Bolthorn F, Rem 700 BDL LA, 300WinMag, 7072171029237
  • 102922, GRS Bolthorn F, Rem 700 BDL SA, 308, 7072171029220
  • 102920, GRS Bolthorn F, Howa SA, 223, 7072171029206
  • 102919, GRS Bolthorn F, Howa SA, 308, 7072171029190
  • 102916, GRS Bolthorn F, Tikka T3 LA, 30-08, 7072171029169
  • 102915, GRS Bolthorn F, Tikka T3 LA, 300 WinMag, 7072171029152
  • 102910, GRS Bolthorn F, Tikka T3, 223, 7072171029107
  • 102909, GRS Bolthorn F, Tikka T3, 308, 7072171029091
  • 102908, GRS Bolthorn F, SSG 3000, 7072171029084
  • 102907, GRS Bolthorn F, Sauer 200 STR, 7072171029077

GRS BOLTHORN CHASSIS SPECIFICATIONS

  • Body made in hard anodized 6082 T6 aluminum.
  • Hinge is made in 304 stainless steel (extra option)
  • Composite grip and side panels.
  • 0.5″ Limbsaver GRS recoil pad.
  • SpeedLock adjustment system.
  • LOP 35.5-38.3 cm.
  • Total length 78 cm
  • Fore end width 56 mm
  • 28 mm adjustment LOP and cheek-piece.
  • Height adjustable recoil pad included.
  • Flush cup sling mounts on all 4 picatinny rails in front and both sides of the rear stock.
  • Picatinny rail on rear stock.
  • Flush cup sling mounts included.
  • Total length 79 cm
  • Weighs 1850-2000 grams depending on model
  • SSG 3000 model is made to fit original magazines
  • The T3 SA stock comes with one 10 round Polymer magazine in either .308 Winchester  (also fits 243, 260 and 22-250) or 223 Remington (also fits 222).
    The magazine well also fits for the standard 3.050″ (78mm) 5 and 10 shot AI magazines
  • The T3 LA comes with one 5 round single stack metal magazine in either 300Winchester magnum (also fits 7mm rem mag) and 30.06 Springfield (also fits 6.5×55 Swedish Mauser)

Torque recommendations: Rear screw 5nm, Front screw 5nm

MDT TAC21 Price