MAGPUL PRO 700 REMINGTON 700 RIFLE CHASSIS SYSTEM

by | Jan 16, 2018 | Magpul Rifle Chassis | 0 comments

Picture of a Magpul Pro 700 Rifle Chassis
Pictures of Magpul Pro 700 Rifle Chassis System in Colors Flat Dark Earth, Black and Olive Drab

Magpul Pro 700 Rifle Chassis System

When Magpul announced the Remington 700 Hunter Stock I remember thinking to myself that it wouldn’t be long until we see a precision rifle chassis from them. I also remember thinking that a well designed priced right precision rifle chassis from Magpul could dominate the low to mid range rifle chassis market. Well I’m here to report the good news that Magpul has officially announced the “Magpul Pro 700” rifle chassis. Unfortunately though I’m more than a little surprised by the $1000 MSRP. That is three times the cost of the hunter stock and in my opinion about 1/3 higher than it should be because at that price shooters are at the price of a complete Savage Stealth or Ruger Precision Rifle. Those are great tack driver chassis based rifles for the cost of the Magpul Pro 700 chassis. Insult to injury the lack of an ARCA plate is a deal breaker for precision rifle crowd. Now with that said I’m a big believer in actually trying hardware first hand instead of relying on critical negative reviews of a product very few have seen or touched. Additionally Magpul still has time to address any perceived shortcomings pointed out by the community.

Ordering Info
Magpul Pro 700 Rifle Chassis System Description

The Magpul Pro 700 Rifle Chassis System is an uncompromising, full featured precision rifle chassis for short action Remington® 700 actions and other Remington® 700 footprint actions. The Pro 700 combines innovative engineering, precision machining, Mil-Spec quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance.

Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700 is also fully ambidextrous. Capable of fitting both right and left-handed actions with the simple swap of a bolt-cutout plate, and with a reversible cheek riser and reversible hinge on the folding version, “lefties” haven’t been “left out.”

Made in U.S.A.

FEATURES

  • Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers
  • Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt cut out plate for left or right hand actions using a 1/8” hex wrench
  • Folding stock with push-button activated durable steel hinge with Melonite® finish is reversible for left or right folding capability with the use of a 5/32” hex wrench. A fixed stock adapter is available for a non-folding stock solution
  • Folding stock is also designed to capture the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles
  • Optional inline mount for clip-on night vision and thermal imaging devices
  • Overall LOP adjustment range is 13.25” – 15.125”
  • Butt pad height can be adjusted up 1.33” and down .90” and is adjustable left or right 5 degrees
  • Comb height adjustment has a 1” range with a secondary locking knob to eliminate movement in the cheek riser
  • Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage
  • Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep, with a .75” fore/aft trigger reach adjustment
  • Additional grip option included with a more aggressive forward sweep (8 degree forward / 20 degree aft edge sweep)
  • Durable steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels
  • M-LOK® slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2)
  • Integrated AICS pattern magazine well optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines
  • Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers
  • Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear and corrosion resistance
  • Ambidextrous thumb shelf for firing hand thumb placement

ITAR
International Traffic in Arms Regulations Controlled Product

Specs

SPECIFICATIONS*

  • Weight –  5.4 lbs
  • Height at Butt Plate – 5.2”
  • Max width – 1.86”
  • Length – 32.7” – 34.6” (23.5” when folded)

* Specifications based on factory configuration.

Magpul Remington Pro 700 SA Adjustable Rifle Chassis

Magpul’s Pro 700 Rifle Chassis combines innovative engineering and precision machining to create a full featured precision rifle chassis for Remington 700 actions. Based on a full billet aluminum skeleton, the Magpul Pro 700 Rifle Chassis is clad in Magpul polymer for comfort, noise mitigation, and ergonomics. With the swap of a bolt-cutout plate, a reversible cheek riser, and reversible hinge the chassis is fully ambidextrous, ensuring that left handed shooters are included in the fun!

  • Machined from 6061-T6 billet aluminum, with Type III hard anodizing
  • Ambidextrous bedding block can be switched for right or left handed shooters
  • Reversible, durable push-button hinge to fold the stock
  • Overall LOP adjustment range is 13.25”-15.125”
  • Butt pad height adjustment from 1.33” down to .90”, also adjust 5 degree left or right
  • Comb height range adjusts 1” with a secondary locking knob, eliminating movement to the cheek riser
  • Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage using only a common hex wrench
  • Chassis features an injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep for enhanced user comfort combined with a .75” fore/aft adjustment range using a common hex wrench
  • Additional grip option included that features a more aggressive sweep and enlarged palm swell
  • Durable cast steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels
  • M-LOK  slots available for accessory mounting
  • Integrated AICS pattern magazine well of reinforced polymer construction optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines
  • Large trigger guard accepts  most factory and aftermarket curved or flat triggers, and can be used with gloves
  • The magazine release is melonite treated steel that is low-profile and ambidextrous

The Magpul Remington 700 Pro Chassis fits up to an MTU barrel contour and is available in black, flat dark earth, and od green. The Remington 700 Pro Chassis would be a great upgrade to an existing gun, or for your next build!

Links to Our Other Guides

| Modular Rifle Chassis System Build Guides | Modular Rifles | Modular Rifle Chassis Systems |Remington 700 Triggers |

Additional 6.5 Creedmoor Content

| 6.5 Creedmoor Posts | J.Allen JAE 700 Rifle Chassis System | Socom Precision Sniper Rifle Contenders | text |

 

MDT LSS XL Gen2 Rifle Chassis System

by | Nov 11, 2017 | Rifle Chassis System, Modular Driven Technologies | 0 comments

Picture of a MDT LSS XL Gen2 Rifle Chassis System
Modular Driven Technologies LSS XL Gen2 Rifle Chassis System

MDT LSS XL Gen2 Rifle Chassis System

Increase accuracy and ergonomics of your rifle with the Modular Driven Technologies LSS XL Gen2 chassis system. The LSS-XL Gen2 is a longer and more feature-rich version of the original MDT LSS chassis system. The LSS-XL Gen2 has been updated with a bold, modern new look inspired by the popularity of the MDT ESS chassis line, while maintaining and improving upon the overall aesthetic of an MDT chassis. The LSS-XL Gen2 allows you to convert your bolt action rifle to a highly versatile rifle allowing you to adjust the ergonomics with the use of AR-15 buttstocks and grips, and at the same time converting it to an external box magazine fed rifle.

Visit Modular Driven Technologies

Learn More
MDT LSS XL Gen2 Rifle Chassis System

Increase accuracy and ergonomics of your rifle with our LSS-XL Gen2 chassis system. The LSS-XL Gen2 is a longer and more feature-rich version of our LSS chassis system. The LSS-XL Gen2 has been updated with a bold, modern new look inspired by the popularity of the ESS chassis line, while maintaining and improving upon the overall aesthetic of an MDT chassis.

The LSS-XL Gen2 allows you to convert your bolt action rifle to a highly versatile rifle allowing you to adjust the ergonomics with the use of AR-15 buttstocks and grips, and at the same time converting it to an external box magazine fed rifle.

Short Action

  • Remington 700 Short Action – Fixed and Carbine Buttstocks – Shipping Nov 14
  • Tikka T3 Short Action – Fixed and Carbine Buttstocks – Shipping Nov 23
  • Howa 1500 Short Action – Fixed and Carbine Buttstocks – Shipping Dec 13
  • Ruger American Short Action – Carbine Buttstocks – Shipping Dec 13
  • Savage Short Action – Fixed and Carbine Buttstocks – Shipping December 8
  • Lithgow Short Action – Carbine Buttstocks – Shipping Jan 6
Long Action 
  • Remington 700 Long Action – Fixed and Carbine Buttstocks – Shipping December 15
  • Tikka T3 Long Action – Fixed and Carbine Buttstocks – Shipping Dec 27
  • Howa 1500 Long Action – Fixed and Carbine Buttstocks – Shipping Dec 29
  • Savage Long Action – Fixed and Carbine Buttstocks – Shipping December 21

MDT LSS XL Chassis Details

The original LSS-XL chassis system was designed as a variant of our highly popular LSS chassis. The LSS chassis was designed for use with compact, short barrelled rifles. Many customers really liked the LSS chassis, but wanted to use a fixed buttstock, and get their bipod out further forward.

This prompted us to design the first-generation LSS-XL chassis system, which has a forend extended by 3″ and was designed to accept fixed rifle stocks without the need of using any adapters.

After the successful launch of our ESS chassis system, requests started pouring in for the new features that had been introduced on the ESS chassis to be rolled out on our other chassis systems. In response, we have upgraded our LSS-XL chassis line with a Gen2 lineup that incorporates the following new features:

  • Bold, modern new look
  • Ambidextrous magazine release
  • Thumbrest above trigger guard
  • Larger barrel channel to accommodate barrels up to the diameter of the action
  • M-Lok pattern attachment slots on all 5 sides of the forend
  • Barricade-stop grooves ahead of mag-well
  • Side-relieved mag well to accommodate bulging magazines
  • Collapsible and fixed buttstock interface options

The chassis is designed with V-shaped bedding surfaces, allowing you to drop your rifle right in without the need for additional bedding. The bottom profile of the V-block cutout has been kept round and close to the action without making contact, maintaining maximum strength. The LSS-XL Gen2 chassis will free float barrels up to 1.350” diameter.

MDT LSS XL Gen2 Mounting and Compatible Accessories

The LSS-XL Gen2 chassis are designed to accept any AR-15 buttstock and pistol grip (purchased separately), offering the option to customize from the wide variety of  Accessories available on the market.

The LSS-XL Gen2 chassis accepts AICS-pattern external box magazines, and supports installation of M-Lok patterned accessories along the forend.

Note: Long action magazines come in 4 different lengths: 3.560”, 3.715″, 3.775″ and 3.850″. Unless otherwise specified, our long action chassis use 3.715 length magazines.

The chassis will accept recoil lugs up to .350″ (8.9mm) thick.

MDT LSS XL Gen2 Chassis Specifications

  • Increases accuracy by up to 21%
  • CNC Machined from 6061 Aluminum.
  • Cerakote finish in Black or Flat Dark Earth.
  • M-Lok pattern attachment system on all 5 faces of the forend.
  • Collapsible buttstock interface option designed for collapsible AR-15 buttstocks, including the MDT Skeleton Carbine Stock.
  • Fixed buttstock interface option designed for fixed AR-15 buttstocks, optimally the MDT Skeleton Rifle Stock V5.
  • Accepts most AR-15 Pistol Grips.
  • Lightweight, free-floating modular forend.
  • Will accommodate barrels up to 1.350″ diameter.
  • Compatible with AICS style magazines.
  • Weight: 1.6lb – 2.0lb, depending on the rifle model.

What you get, and what you need

The LSS-XL Gen2 chassis system comes as a 1-piece chassis, with all required mounting hardware included. This includes new action screws, and a screw for the pistol grip.

To complete this chassis on your rifle, the additional items you need to purchase are:

  • Any AR-15 buttstock.
  • A buffer tube for your buttstock. (Both milspec and commercial work on our chassis)
  • An AR-15 Pistol Grip.  For fixed interface chassis, a grip without a beavertail, or with a soft (bendable) beavertail must be used.
  • At least one magazine

Important Notes

Howa 1500 / Weatherby Vanguard actions

Only our polymer magazines will work in the short action rifles due to the flat bottom. The long action rifles will work with the metal 3.715″ magazines without fitting.

For .223 models the bolt stop prevents the bolt from moving back far enough to pick up the rounds.  This can easily be modified by removing the bolt stop and trimming the contact face.

Savage models 10/110 11/111 12/112 16/116

For rifles with the bolt release at the bottom, the bolt release can be engaged through the side of the chassis, using a pin or tool. (Not included)

Savage Long Action in 338 Lapua Magnum

Savage Long Action chassis systems all use 3.715″ AICS magazine wells. The BA in 338 Lapua Magnum uses 3.850″ magazines and have recently switched to a thicker recoil lug which will not fit our chassis. The ESS has been specifically designed around the current BA 110 in 338 Lapua Magnum.

Tikka T3 – Long Calibers

Only our Metal 3.560 magazine will fit with the chassis for this action and needs to be purchased separately.

Ruger American

The action screw is located directly above the magazine lever. This means that the magazine lever needs to be installed AFTER installing the action into the chassis. Detailed instructions are provided, and an installation video can be found here.

Ruger American in 223/5.56mm requires the use of a magazine with extended feed lips, such as this one: http://shopruger.com/556-NATO-10-Round-Magazine/productinfo/90458/.  This is to prevent the round from being released before entering the chamber.
Does not work with 300 Blackout

This chassis will also accept the Predator and Ranch versions. Please read the notes above regarding magazines for 223/5.56 rifles.

Dimensions shown are based on Remington 700 Short Action. *Skeleton Carbine Stock show below is the 9.75″ Version

MDT LSS XL Gen2 Rifle Chassis Dimensions
Picture of a MDT LSS XL Gen2 Rifle Chassis System FDE

Links to Our Other Guides

| Modular Rifle Chassis System Build Guides | Modular Rifles | Modular Rifle Chassis Systems |Remington 700 Triggers |

BROWNELLS MDT BRN-1 M-LOK CHASSIS | LSS

by | Nov 9, 2017 | Modular Driven Technologies, Rifle Chassis System | 0 comments

Picture of BROWNELLS MDT BRN-1 M-LOK CHASSIS - MDT LSS
BROWNELLS MDT BRN-1 M-LOK CHASSIS - MDT LSS CHASSIS

BROWNELLS MDT BRN-1 M-LOK CHASSIS

To me this is an unexpected product offering from Brownells, a Brownells branded MDT LSS Chassis. Brownells used to be slow to respond to firearm market trends and in my opinion this bolt action chassis finally shows some forward thinking on Brownells part. For me as i have stated before I really like partnerships between my favorite companies and Modular Driven Technologies and Brownells are two of my favorites. lastly i think the Rams head logo is a cool touch given that’s exactly the types of beasts that might see action from this chassis.

There are currently 18 models to choose from including two for the Ruger American Rifle. Colors are Black or Flat Dark Earth aka FDE

Visit the MDT LSS Page

Learn More

BROWNELLS MDT BRN-1 M-LOK CHASSIS | MDT LSS CHASSIS

The Brownells bolt action chassis is designed to accept carbine AR-15 buttstocks and pistol grips (purchased separately), offering the option to customize from the wide variety of Accessories available on the market.

The Brownells MDT LSS chassis uses external box style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, M-LOK accessories on the forend.
Note: Long action magazines come in 3 different lengths: 3.715″, 3.775″ an 3.850″. this chassis use 3.715 length magazines.

The max thickness of recoil lug recommend is .350″ (8.9mm)

Specifications:

  • Increases accuracy
  • CNC Machined from 6061 Aluminum
  • Cerakote Finish in Black or Flat Dark Earth or Sniper Grey
  • M-LOK Compatible
  • Designed for carbine AR-15 buttstocks
  • Accepts most AR-15 Pistol Grips
  • Lightweight, free-floating modular forend
  • Will accommodate barrels up to 1″ diameter.
  • Compatible with AICS style magazines in .223 or .308 (SA) and 300WM, 30.06, 338LM (LA). (Long Action Magazine length 3.715)
  • Weight: 1.8lb – 2.1lb

WHAT YOU GET, AND WHAT YOU NEED
The Brownells bolt action chassis system comes as a 1-piece chassis, with all required mounting hardware included. This includes new action screws, and a screw for the pistol grip.
To complete this chassis on your rifle, the additional items you need to purchase are:

  • Any AR-15 buttstock. (Carbine stocks are best suited. )
  • A buffer tube for your buttstock. (Both milspec and commercial work on our chassis)
  • An AR-15 Pistol Grip.  At least one magazine

IMPORTANT NOTES
Howa 1500 / Weatherby Vanguard actions
Only MDT polymer magazines will work in the short action. The long action rifles will work with the metal 3.715″ magazines without fitting.
For .223 models the bolt stop may be too long. This can easily be modified.

Savage models 10/110 11/111 12/112 16/116
For rifles with the bolt release at the bottom, the bolt release can be engaged through the side of the chassis, using a pin or tool. (Not included)

Tikka T3 – Long Calibers
Only the MDT Metal 3.56 magazine will fit with the chassis for this action and needs to be purchased separately.

Links to Our Other Guides

| Modular Rifle Chassis System Build Guides | Modular Rifles | Modular Rifle Chassis Systems |Remington 700 Triggers |

ACCURATE MAG SPORT TACT CHASSIS SYSTEM

by | Oct 6, 2017 | Accurate Mag, Rifle Chassis System | 0 comments

ACCURATE MAG SPORT TACT CHASSIS SYSTEM

ACCURATE MAG SPORT TACT CHASSIS SYSTEM
ACCURATE MAG SPORT TACT CHASSIS SYSTEM

ACCURATE MAG SPORT TACT CHASSIS SYSTEM

The Accurate-Mag Sport-Tact Remington 700 Chassis is a complete stock system, ready for installation. Existing barreled action can be removed from current stocks, and simply bolted into the Sport-Tact Chassis. Included on the chassis is an adjustable stock, which has a variable LOP, from 13 to 15.75″. The cheek-piece can also be adjusted fore & aft, as well as up & down. Front handguard includes side and bottom picatinny rails, while providing plenty of room to free-float a barrel. Chassis is machined from aluminum, allowing for rigid mounting of your action. AR-15 style pistol grip is included. Short Action Chassis includes 5rd 308 magazine. Accepts Accurate-Mag double stack detachable magazines or AICS magazines.

SPECS: Fits – Short Action Remington 700 rifles.  Includes 5rd magazines (SA 308 Mag).  Construction – Aluminum.  Finish – Matte black anodizing.  Includes AR-15 grip.  Adjustable stock, for LOP and cheekweld.

Learn More

SPORT-TACT CHASSIS SYSTEM

The Sport-Tact line of sporting tactical rifle chassis has been developed from Military requirements and the needs of long range hunting enthusiasts. The approach to the design of the chassis line was to keep the three major component groups completely modular (Butt-Stock, Center Section and For-End) to allow a mix and match scenario to satisfy any solicitation or sporting requirement.

The corner stone component of the sport-tact Chassis system is the dedicated center section in either short or long action. Currently we offer these for Remington and Savage based systems. Matched with current offerings of AM Products cartridge magazines.

Very Simply you can build your own chassis system by selecting the desired butt-stock, center section and fore-end from the option described before and shown to the right and select a finish of either Black Hard Coat or Gun Kote Flat Dark Earth or Sand.

In addition to the center section options for most of the major rifle receivers, many fore-end and butt-stock options are available. Butt-Stock options include a fixed butt-stock machined from 6061-T6 aircraft grade aluminum and a folding butt-stock with aluminum frame covered with a plastic skin for a soft and warm feel. Folding stock models are available with and without a butt-spike. Fore-End options include a short, open top rail section with a full length bot-tom rail and movable rail segments on the sides. Also available is the Accurate-Mag tactical fore-end with full length top rail on top and either integrated picatinny rails machined into the front portion of the fore-end on the sides and bottom or with a Modular Rail System running the entire length of the sides and bottom.

ADVANCED LEVEL CHASSIS (Options Included)
Actions: SA or LA in SAV or REM
Butt-Stocks: Tactical Folding Butt-Stock with Butt-Spike
Fore-Ends: Tactical Fore-End with MRS
Colors: Gun Kote Finish

BASE LEVEL CHASSIS (Options Included)
Actions: SA or LA in SAV or REM
Butt-Stocks: Fixed Butt-Stock
Fore-Ends: Tri-Rail Fore-End
Colors: Black Finish

Save

Links to Our Other Guides

| Modular Rifle Chassis System Build Guides | Modular Rifles | Modular Rifle Chassis Systems |Remington 700 Triggers |

Save

Save

Save

Save

Masterpiece Arms MPA BA Chassis | Rifle Chassis

by | Aug 21, 2017 | Masterpiece Arms, Rifle Chassis System | 0 comments

Masterpiece Arms MPA BA Chassis
Picture of a Masterpiece Arms MPA BA Chassis Gunmetal

Masterpiece Arms MPA BA Chassis

August 21, 2017, As I update this post on the Masterpiece Arms MPA BA Chassis System it’s interesting to note that the MPA BA Chassis acceptance in the field has grown exponentially in the past two years. I think we need to get one in our hands soon.

The 5.2 pound Masterpiece Arms MPA BA Chassis take any AICS type magazines (Magazine not included). See related products for magazines for your chassis.

This unique chassis system provides a super precision platform for the Remington 700 Short and Long, Savage and Howa Short or Long Actions, Badger M2013, Mausingfield, Surgeon, Stillers, Surgeon and many others. New inlets are being added frequently.

Whether you’re increasing the accuracy capabilities of your existing action due to the V-Bedding System as well as adding tactical features to your rifle, or building a super precision rifle for long range competitions, the MPA BA Chassis will provide a world class chassis system sure to exceed your expectations. We also inlet for Tikka T3, Badger M2013, Surgeon 591SA & 1086 LA and others.

The V-Bedding system is also configured to allow the ability to glass bed the action and straight section of the barrel if desired.

The chassis is machined on our CNC Horizontal Machining Centers to exacting tolerances from 6061 aluminum. The MPA produced Buttstock includes an adjustable length of pull, recoil pad with height and cant adjustment, adjustable cheek riser and adjustable Monopod.

The monopod will lock into the vertical position, and has a quick height locating method with fine adjustment capabilities. When not in use, the Monopod tucks into the frame of the buttstock. There is a vertical position and also one at 45 degrees, used when you need that “in between” height of the buttstock of the rifle in acquiring the target.

Length of pull is between 13.75-14.75″ although this length can be modified by thinner or thicker recoil pads. Weight is 5.2 lbs.Coating is Ceramic (Cerakote) – all available in a variety of colors. The upper Night Vision bridge provides a seat for a picatinny rail. A matching rail is mounted to the bottom of the chassis – both giving the shooter plenty of rail space for a variety of enhancements.

On our chassis for the Stillers TAC338, this chassis will not have the barricade stop system nor will it have the option for the supplemental rail. These two features (barricade stop and supplemental rail) are features that are not normally used when shooting a 338 Lapua Cartridge.

The maximum barrel profile on our chassis, without modification to the barrel channel, is an M24 contour. If your barrel has a larger profile, please contact MPA to discuss. We can go up to a 1.250 straight profile, but need to know at the time of order.

For Savage Actions, our Chassis will accommodate both Top and Bottom Bolt Release configurations. Available for purchase from Brownells.

Masterpiece Arms MPA BA Chassis Features

  • Machined from 6061 Aluminum
  • V-Bedding System
  • MPA Buttstock with Adjustable Cheek Riser, Length of Pull and Monopod
  • Monopod Extends to 5″ with Quick and Fine Adjustment
  • A2 Pistol Grip
  • Front Night Vision Bridge
  • Lower Picatinny Rail
  • Handstop/Barrier Stop System (Standard)
  • Multiple QD Sling Swivel Locations
  • User Located Side Rails (option)
  • Durable Cerakote Finish in a Variety of Colors
  • Unique Pocketing System reduces weight and increases structural integrity of the chassis
  • Adjustable Length of Pull 13.75-14.75″
  • Recoil Pad is adjustable for Height and Cant
  • Adjustable Cheek Riser
  • Built in Bubble Level
  • Machined Thumb Notch

Save

Save

Save

Save

Save

Visit Masterpiece Arms

Save

Remington Defense RACS M40A6 USMC Chassis 86485

by | Jun 14, 2017 | Rifle Chassis System, Blog Posts | 0 comments

Picture of a Remington Defense RACS M40A6 USMC Chassis 86485

Remington Defense RACS M40A6 USMC Chassis 86485

This Remington Defense RACS M40A6 USMC Chassis 86485 features a sturdy platform for precision shooting, 20 MOA full length picatinny rail, captive action screws, 3 sections of picatinny rail section plus one Harris bipod adapter and a folding RACS stock. The operator friendly RACS also features a free-float tubular design, fully featured front handguard, the ability to attach auxiliary rail sections to any of the seven facets of the octagonal handguard tube. The pistol grip is rubber with a good grip surface and excellent ergonomics. The pistol grip is interchangeable with standard AR grips if you would prefer something else.

The patent pending Remington Accessory Chassis System (RACS) incorporates state-of-the-art operator-defined attributes such as a free-float tubular design and a fully featured front handguard section. Operator-selectable auxiliary rail sections in various lengths can be attached to any of the seven remaining facets of the octagonal handguard, which allows the operator to install clip-on in-line night vision systems. The folding RACS buttstock provides the operator with a wide variety of adjustments to allow setting the system to suit the shooter and the operating conditions.

Visit Remington

This chassis does not come with a magazine but does take Accuracy International AICS magazines:

 

Additional Rifle Chassis Systems Below