MAGPUL PRO 700 REMINGTON 700 RIFLE CHASSIS SYSTEM

Picture of a Magpul Pro 700 Rifle Chassis
Pictures of Magpul Pro 700 Rifle Chassis System in Colors Flat Dark Earth, Black and Olive Drab

Magpul Pro 700 Rifle Chassis System

When Magpul announced the Remington 700 Hunter Stock I remember thinking to myself that it wouldn’t be long until we see a precision rifle chassis from them. I also remember thinking that a well designed priced right precision rifle chassis from Magpul could dominate the low to mid range rifle chassis market. Well I’m here to report the good news that Magpul has officially announced the “Magpul Pro 700” rifle chassis. Unfortunately though I’m more than a little surprised by the $1000 MSRP. That is three times the cost of the hunter stock and in my opinion about 1/3 higher than it should be because at that price shooters are at the price of a complete Savage Stealth or Ruger Precision Rifle. Those are great tack driver chassis based rifles for the cost of the Magpul Pro 700 chassis. Insult to injury the lack of an ARCA plate is a deal breaker for precision rifle crowd. Now with that said I’m a big believer in actually trying hardware first hand instead of relying on critical negative reviews of a product very few have seen or touched. Additionally Magpul still has time to address any perceived shortcomings pointed out by the community.

Magpul Pro 700 Rifle Chassis System Description

The Magpul Pro 700 Rifle Chassis System is an uncompromising, full featured precision rifle chassis for short action Remington® 700 actions and other Remington® 700 footprint actions. The Pro 700 combines innovative engineering, precision machining, Mil-Spec quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance.

Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700 is also fully ambidextrous. Capable of fitting both right and left-handed actions with the simple swap of a bolt-cutout plate, and with a reversible cheek riser and reversible hinge on the folding version, “lefties” haven’t been “left out.”

Made in U.S.A.

FEATURES

  • Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers
  • Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt cut out plate for left or right hand actions using a 1/8” hex wrench
  • Folding stock with push-button activated durable steel hinge with Melonite® finish is reversible for left or right folding capability with the use of a 5/32” hex wrench. A fixed stock adapter is available for a non-folding stock solution
  • Folding stock is also designed to capture the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles
  • Optional inline mount for clip-on night vision and thermal imaging devices
  • Overall LOP adjustment range is 13.25” – 15.125”
  • Butt pad height can be adjusted up 1.33” and down .90” and is adjustable left or right 5 degrees
  • Comb height adjustment has a 1” range with a secondary locking knob to eliminate movement in the cheek riser
  • Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage
  • Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep, with a .75” fore/aft trigger reach adjustment
  • Additional grip option included with a more aggressive forward sweep (8 degree forward / 20 degree aft edge sweep)
  • Durable steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels
  • M-LOK® slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2)
  • Integrated AICS pattern magazine well optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines
  • Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers
  • Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear and corrosion resistance
  • Ambidextrous thumb shelf for firing hand thumb placement

ITAR
International Traffic in Arms Regulations Controlled Product

Specs

SPECIFICATIONS*

  • Weight –  5.4 lbs
  • Height at Butt Plate – 5.2”
  • Max width – 1.86”
  • Length – 32.7” – 34.6” (23.5” when folded)

* Specifications based on factory configuration.

Magpul Remington Pro 700 SA Adjustable Rifle Chassis

Magpul’s Pro 700 Rifle Chassis combines innovative engineering and precision machining to create a full featured precision rifle chassis for Remington 700 actions. Based on a full billet aluminum skeleton, the Magpul Pro 700 Rifle Chassis is clad in Magpul polymer for comfort, noise mitigation, and ergonomics. With the swap of a bolt-cutout plate, a reversible cheek riser, and reversible hinge the chassis is fully ambidextrous, ensuring that left handed shooters are included in the fun!

  • Machined from 6061-T6 billet aluminum, with Type III hard anodizing
  • Ambidextrous bedding block can be switched for right or left handed shooters
  • Reversible, durable push-button hinge to fold the stock
  • Overall LOP adjustment range is 13.25”-15.125”
  • Butt pad height adjustment from 1.33” down to .90”, also adjust 5 degree left or right
  • Comb height range adjusts 1” with a secondary locking knob, eliminating movement to the cheek riser
  • Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage using only a common hex wrench
  • Chassis features an injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep for enhanced user comfort combined with a .75” fore/aft adjustment range using a common hex wrench
  • Additional grip option included that features a more aggressive sweep and enlarged palm swell
  • Durable cast steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels
  • M-LOK  slots available for accessory mounting
  • Integrated AICS pattern magazine well of reinforced polymer construction optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines
  • Large trigger guard accepts  most factory and aftermarket curved or flat triggers, and can be used with gloves
  • The magazine release is melonite treated steel that is low-profile and ambidextrous

The Magpul Remington 700 Pro Chassis fits up to an MTU barrel contour and is available in black, flat dark earth, and od green. The Remington 700 Pro Chassis would be a great upgrade to an existing gun, or for your next build!

BROWNELLS MDT BRN-1 M-LOK CHASSIS | LSS

Picture of BROWNELLS MDT BRN-1 M-LOK CHASSIS - MDT LSS
BROWNELLS MDT BRN-1 M-LOK CHASSIS - MDT LSS CHASSIS

BROWNELLS MDT BRN-1 M-LOK CHASSIS

To me this is an unexpected product offering from Brownells, a Brownells branded MDT LSS Chassis. Brownells used to be slow to respond to firearm market trends and in my opinion this bolt action chassis finally shows some forward thinking on Brownells part. For me as i have stated before I really like partnerships between my favorite companies and Modular Driven Technologies and Brownells are two of my favorites. lastly i think the Rams head logo is a cool touch given that’s exactly the types of beasts that might see action from this chassis.

There are currently 18 models to choose from including two for the Ruger American Rifle. Colors are Black or Flat Dark Earth aka FDE

Visit the MDT LSS Page

BROWNELLS MDT BRN-1 M-LOK CHASSIS | MDT LSS CHASSIS

The Brownells bolt action chassis is designed to accept carbine AR-15 buttstocks and pistol grips (purchased separately), offering the option to customize from the wide variety of Accessories available on the market.

The Brownells MDT LSS chassis uses external box style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, M-LOK accessories on the forend.
Note: Long action magazines come in 3 different lengths: 3.715″, 3.775″ an 3.850″. this chassis use 3.715 length magazines.

The max thickness of recoil lug recommend is .350″ (8.9mm)

Specifications:

  • Increases accuracy
  • CNC Machined from 6061 Aluminum
  • Cerakote Finish in Black or Flat Dark Earth or Sniper Grey
  • M-LOK Compatible
  • Designed for carbine AR-15 buttstocks
  • Accepts most AR-15 Pistol Grips
  • Lightweight, free-floating modular forend
  • Will accommodate barrels up to 1″ diameter.
  • Compatible with AICS style magazines in .223 or .308 (SA) and 300WM, 30.06, 338LM (LA). (Long Action Magazine length 3.715)
  • Weight: 1.8lb – 2.1lb

WHAT YOU GET, AND WHAT YOU NEED
The Brownells bolt action chassis system comes as a 1-piece chassis, with all required mounting hardware included. This includes new action screws, and a screw for the pistol grip.
To complete this chassis on your rifle, the additional items you need to purchase are:

  • Any AR-15 buttstock. (Carbine stocks are best suited. )
  • A buffer tube for your buttstock. (Both milspec and commercial work on our chassis)
  • An AR-15 Pistol Grip.  At least one magazine

IMPORTANT NOTES
Howa 1500 / Weatherby Vanguard actions
Only MDT polymer magazines will work in the short action. The long action rifles will work with the metal 3.715″ magazines without fitting.
For .223 models the bolt stop may be too long. This can easily be modified.

Savage models 10/110 11/111 12/112 16/116
For rifles with the bolt release at the bottom, the bolt release can be engaged through the side of the chassis, using a pin or tool. (Not included)

Tikka T3 – Long Calibers
Only the MDT Metal 3.56 magazine will fit with the chassis for this action and needs to be purchased separately.

Masterpiece Arms MPA BA Chassis | Rifle Chassis

Masterpiece Arms MPA BA Chassis
Picture of a Masterpiece Arms MPA BA Chassis Gunmetal

Masterpiece Arms MPA BA Chassis

August 21, 2017, As I update this post on the Masterpiece Arms MPA BA Chassis System it’s interesting to note that the MPA BA Chassis acceptance in the field has grown exponentially in the past two years. I think we need to get one in our hands soon.

The 5.2 pound Masterpiece Arms MPA BA Chassis take any AICS type magazines (Magazine not included). See related products for magazines for your chassis.

This unique chassis system provides a super precision platform for the Remington 700 Short and Long, Savage and Howa Short or Long Actions, Badger M2013, Mausingfield, Surgeon, Stillers, Surgeon and many others. New inlets are being added frequently.

Whether you’re increasing the accuracy capabilities of your existing action due to the V-Bedding System as well as adding tactical features to your rifle, or building a super precision rifle for long range competitions, the MPA BA Chassis will provide a world class chassis system sure to exceed your expectations. We also inlet for Tikka T3, Badger M2013, Surgeon 591SA & 1086 LA and others.

The V-Bedding system is also configured to allow the ability to glass bed the action and straight section of the barrel if desired.

The chassis is machined on our CNC Horizontal Machining Centers to exacting tolerances from 6061 aluminum. The MPA produced Buttstock includes an adjustable length of pull, recoil pad with height and cant adjustment, adjustable cheek riser and adjustable Monopod.

The monopod will lock into the vertical position, and has a quick height locating method with fine adjustment capabilities. When not in use, the Monopod tucks into the frame of the buttstock. There is a vertical position and also one at 45 degrees, used when you need that “in between” height of the buttstock of the rifle in acquiring the target.

Length of pull is between 13.75-14.75″ although this length can be modified by thinner or thicker recoil pads. Weight is 5.2 lbs.Coating is Ceramic (Cerakote) – all available in a variety of colors. The upper Night Vision bridge provides a seat for a picatinny rail. A matching rail is mounted to the bottom of the chassis – both giving the shooter plenty of rail space for a variety of enhancements.

On our chassis for the Stillers TAC338, this chassis will not have the barricade stop system nor will it have the option for the supplemental rail. These two features (barricade stop and supplemental rail) are features that are not normally used when shooting a 338 Lapua Cartridge.

The maximum barrel profile on our chassis, without modification to the barrel channel, is an M24 contour. If your barrel has a larger profile, please contact MPA to discuss. We can go up to a 1.250 straight profile, but need to know at the time of order.

For Savage Actions, our Chassis will accommodate both Top and Bottom Bolt Release configurations. Available for purchase from Brownells.

Masterpiece Arms MPA BA Chassis Features

  • Machined from 6061 Aluminum
  • V-Bedding System
  • MPA Buttstock with Adjustable Cheek Riser, Length of Pull and Monopod
  • Monopod Extends to 5″ with Quick and Fine Adjustment
  • A2 Pistol Grip
  • Front Night Vision Bridge
  • Lower Picatinny Rail
  • Handstop/Barrier Stop System (Standard)
  • Multiple QD Sling Swivel Locations
  • User Located Side Rails (option)
  • Durable Cerakote Finish in a Variety of Colors
  • Unique Pocketing System reduces weight and increases structural integrity of the chassis
  • Adjustable Length of Pull 13.75-14.75″
  • Recoil Pad is adjustable for Height and Cant
  • Adjustable Cheek Riser
  • Built in Bubble Level
  • Machined Thumb Notch

Save

Save

Save

Save

Save

Save

Savage Model 10 APO Ashbury Precision Ordnance

Picture of a Savage Model 10 APO by Ashbury Precision Ordnance

Savage Model 10 APO Precision Bolt Action Chassis Rifle

The say the Savage Model 10 APO announcement took me by surprise is an understatement. Ashbury Precision Ordnance is a clear competitor of Modular Driven Technologies and Drake Associates. MDT and Drake with Savage are responsible for the Savage Stealth Rifle. I cant help but wonder if this is a result of MDT Chassis appearing on Savage’s competitors rifles or the reverse. If you do not know already the Mossberg MVP-LC and Weatherby Vanguard Modular Chassis Rifle both utilize a MDT LSS chassis. Regardless APO chassis is the “Good Stuff” with regards to tactical rifle chassis. It will be interesting to see if the Savage APO is able to gain market share from the highly sought after Ruger Precision rifle. I wouldn’t mind some range time with the 6.5 Creedmoor chambered model.

Savage Arms has teamed with Ashbury Precision Ordnance (APO) to bring precision shooters the Savage Model 10 APO Chassis Bolt Action Rifle, effectively expanding their line of long-range chassis rifles for recreational shooting, hunting and tactical competition. These rifles feature a Model 10 factory-blueprinted barreled action mated to the new APO SABER MRCS-AR modular-rifle chassis with a Magpul CTR shoulder stock that features a folding double-locking hinge. Octagonal aluminum handguard with M-LOK attachment system. Adjustable Magpul MOE pistol grip and six-position mil-spec AR-style retractable stock offer a secure yet comfortable grip. Comes equipped with Cabela’s exclusive Red target AccuTrigger. 5R rifling. Includes one Magpul PMAG® AICS five-round detachable magazine.

Part No.     Description UPC MSRP

22631           10 Savage/Ashbury 308 Win. 24” bbl. 011356-22631-0 $1,799

22632           10 Savage/Ashbury 6.5 Creed. 24” bbl. 011356-22632-7 $1,799

Visit Savage Arms, Visit Ashbury Precision Ordnance

Picture of a Savage Model 10 APO Precision Bolt Action Chassis Rifle
Picture of a Savage Model 10 APO
Picture of a Savage Model 10 Ashbury Precision Ordnance
Picture of a Savage Model 10 Ashbury Precision Ordnance Chassis Rifle

Remington Defense RACS M40A6 USMC Chassis 86485

Picture of a Remington Defense RACS M40A6 USMC Chassis 86485

Remington Defense RACS M40A6 USMC Chassis 86485

This Remington Defense RACS M40A6 USMC Chassis 86485 features a sturdy platform for precision shooting, 20 MOA full length picatinny rail, captive action screws, 3 sections of picatinny rail section plus one Harris bipod adapter and a folding RACS stock. The operator friendly RACS also features a free-float tubular design, fully featured front handguard, the ability to attach auxiliary rail sections to any of the seven facets of the octagonal handguard tube. The pistol grip is rubber with a good grip surface and excellent ergonomics. The pistol grip is interchangeable with standard AR grips if you would prefer something else.

The patent pending Remington Accessory Chassis System (RACS) incorporates state-of-the-art operator-defined attributes such as a free-float tubular design and a fully featured front handguard section. Operator-selectable auxiliary rail sections in various lengths can be attached to any of the seven remaining facets of the octagonal handguard, which allows the operator to install clip-on in-line night vision systems. The folding RACS buttstock provides the operator with a wide variety of adjustments to allow setting the system to suit the shooter and the operating conditions.

Visit Remington

This chassis does not come with a magazine but does take Accuracy International AICS magazines:

 

Additional Rifle Chassis Systems Below