Remington 700 Compatible | MDT TAC21 Chassis System

by | Aug 29, 2015 | Modular Driven Technologies, Rifle Chassis System | 0 comments

MDT TAC21 Chassis System

Picture of the best Remington 700 Modular Rifle Chassis the MDT TAC21 Chassis

MDT TAC21 20 inch Suppressed Modular Rifle

MDT TAC21 Chassis System for Remington 700 Bolt Action Rifles

MDT TAC21 20 inch Suppressed – Project Complete

MDT TAC21 Chassis –  As reflected on the page devoted to this project this rifle kicked off the rebirth of modularrifle.com and I’m quite pleased with how everything turned out.

Modular Driven Technologies – The entire project was a pleasure from the start thanks in large part to Maarten of MDT. He patiently answered each and every email in a timely and professional manner. Maarten is the single reason our second project will be a also be from MDT.

Packaging – The packaging was the first indication of the attention to detail and quality that MDT represents. So often these days gun parts are wrapped in paper paper, stuffed in a box and with a little luck arrive without to many dings and scuff marks. No chance of that with the TAC21. The unit ships in an ample box with a closed cell foam interior fitted for the individual chassis parts. Nicely done.

Construction – The MDT TAC21 Chassis is precision in and out. Flawless manufacturing, fit and finish. No interference from the Cerakote. Holes are cut clean and straight. Threads are cut clean. The pieces all go together precisely without forcing while retaining a tight fit. Make no mistake this is a piece of heavy duty gear which is not readily apparent in internet pictures.

Assembling the MDT TAC21 Chassis – The instruction manual is well done and written clearly. Installation was pretty straight forward if the directions are followed. (Remove the scope mount screws). As stated previously I suggest using the pdf instructions below as they are easier to read and view on a computer monitor.

Downloads

Note:We are going to call the MDT TAC21 20 inch Suppressed Modular Rifle project complete even though a keen eye might notice the images reflect a Larue Tactical Scope Mount and a Leupold Riflescope instead of the Vortex Viper PST 4-16×50 FFP Riflescope and Ameican Defense Manufacturing Scope Mount as listed on the project page. We will update the images once the new scope is in hand.

MDT CHASSIS MDT TAC21 CHASSIS

Atlas Bipods Best Bipod For Modular Rifle Chassis Systems

Atlas Bipods

 

Drake Hunter Stalker Long Action LWSS Universal Chassis

by | Aug 26, 2015 | Drake, Rifle Chassis System | 0 comments

  1. Home
  2. Modular Driven Technologies

The new Drake Hunter Stalker Long Action LWSS Universal Chassis is designed for the hunter, tactical marksman and law enforcement sniper. It is built with the finest components available to make it lightweight, versatile, accurate and affordable. Offered in several colors, the Hunter Stalker Long Action is an universal chassis that is available for the Remington 700 and Savage model 110 or 111.

Drake Hunter Stalker Long Action LWSS Universal Chassis for Rifles

Hunter Stalker Long Action LWSS Universal Chassis

Download – Drake Hunter Stalker Long Action LWSS Universal Chassis

  • New Drake Upgraded XL Version (Colors – Blk, FDE, OD)
  • Right Hand/Left Hand Compatible System
  • 20 MOA Rail System
  • Bipod Attachment Point
  • FAB Defense GL-Shock-CP with Mil. Spec Tube
  • Adjustable Cheek Riser Kit
  • Hogue Pistol Grip
  • AICS Pattern Magazine
  • Optional 20 MOA Long Night Vision Capable Rail System
  • Optional 3 and 9 O’Clock 6″ Side Rail Kit
  • Available for the: Remington 700 Long Action and Savage Model 110/111 Long Action

Hunter Stalker LWSS Chassis is made Exclusively for Drake Associates by Modular Driven Technologies/MDT

MDT Rifle Chassis System

Drake Hunter Stalker Long Action LWSS Universal Chassis

Save

Save

Links to Our Other Guides

| Modular Rifle Chassis System Build Guides | Modular Rifles | Modular Rifle Chassis Systems |Remington 700 Triggers |

Save

PRS Adjustable Butt Plate

by | Aug 26, 2015 | Buttstocks, Gear, Modular Driven Technologies | 0 comments

PRS Adjustable Butt Plate MDT www.modularrifle.com

PRS Adjustable Butt Plate

The Modular Driven Technologies PRS Adjustable Butt Plate  is three-way adjustable for drop pitch and offset as well as length of pull. It further enhances the MAGPUL PRS® stock by adding the adjustability and the comfort of a soft rubber recoil pad. This is a complete module. It replaces the existing MAGPUL PRS® recoil pad, mechanism and all. Visit Modular Driven Technologies for ordering information

PRS Adjustable Butt Plate Features:

  • Allows for PRS stocks to be perfectly fit to your position and/or clothing
  • Adjustable vertically and for cant/rotation
  • PRS butt plate retains the LOP adjustment that comes standard with PRS stocks
  • Includes soft, rubber, recoil pad
  • Adjustments are easily accessed through the rear of the recoil pad
  • Over 3 inches of vertical adjustment
  • Easily replace existing PRS hardware
  • Aluminum construction with matte black anodizing and steel hardware with a matte black finish

MDT Magpul PRS Adjustable Butt Plate Installation Video by Modular Driven Technologies

Modular Driven Technologies | MDT HS3 | Rifle Chassis System

by | Aug 21, 2015 | Modular Driven Technologies, Rifle Chassis System | 0 comments

  1. Home
  2. Modular Driven Technologies
MDT LSS and HS3 Instruction Manual

[pdf-embedder url=”https://modularrifle.com/wp-content/uploads/2017/07/MDT-LSS-HS3-Instruction-Manual.pdf” title=”MDT LSS HS3 Instruction Manual”]

Modular Driven Technologies MDT HS3 Modular Rifle Chassis System

MDT HS3 Modular Rifle Chassis System

Modular Driven Technologies MDT HS3 Rifle Chassis System – One of the things about running forums, websites and blogs is we often get to test a companies web based customer service. To us that is an important detail in 2015.  If your going to have an online business website that  contains a contact email, contact form or help desk system you sure as heck better use it. Shooters expect a response. It’s your business past and present to lose. Anyhow every now and then you run into folks that exceed expectations. Folks like Roger of Forward Controls Design, Josh at Criterion Barrels and now Maarten at Modular Driven Technologies who take the time to answer all your questions and then some. That type of support and service makes it easy for them to separate a shooter from their hard earned dollars.

Based on my recent dealings it’s been a pleasure to re-launch this site with my initial focus on projects based on MDT products.  This time the Modular Driven Technologies MDT HS3, right hand for  Remington 700 BDL 22-250

 

Improve accuracy and ergonomics with our HS3 Chassis system. The HS3 is a light (2.2lb) chassis system for bolt action rifles that allows use of AR-15 buttstocks and grips to suit your needs. It is machined from 6061 aluminum, hard anodized and finished with black or FDE side panels for color, grip and feel.

Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.47lb / 1.4kg and was designed based on customer feedback who wanted longer fore ends (3″ longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated

 

  • Weight: 1.4kg – 2.47lb
  • Designed for AR-15 fixed butt-stocks including our Skeleton Rifle Stock.
  • Accepts any AR-15 grip, without a beavertail.
  • Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
  • Polymer sides in Black or Flat Dark Earth (FDE)

Available Rifle Action Inlets

  • Remington 700 Short Action
  • Remington 700 Long Action
  • Tikka T3 Short Calibers
  • Tikka T3 Long Calibers (Requires MDT 3.540 Magazine)
  • Savage Models 10, 11, 12, 16 – Short Calibers
  • Savage Models 110, 111, 112, 116 – Long Calibers
  • Howa 1500 / Weatherby Vanguard – Short Calibers (Only works with MDT polymer agazines)

Coming Soon:

  • Savage Axis – Short Calibers
  • Mossberg MVP – .223
  • Mossberg MVP – .308
  • Howa 1500 / Weatherby Vanguard – Long Calibers
  • Remington Model 7
  • Remington Model 783 – Short Calibers

Dimensions:

The dimensions shown are based on a Remington 700 Short Action.
Note that the Skeleton Rifle Stock shown is 1″ shorter than a Magpul PRS.

Modular Rifle Chassis System MDT HS3 Dimensions

MDT HS3 Dimensions

MDT CHASSIS Modular Driven Technologies MDT HS3

Modular Driven Technologies LSS- Buy MDT LSS Modular Rifle Chassis System

Save