Atlas Bipod BT46-LW17 | Best Bolt Action Rifle Bipod

Best  Bipod the Atlas Bipod BT46-LW17

A picture of the best bipod! the Atlas Bipod BT46-LW17

Atlas Bipod PSR BT46-LW17

We purchased the Atlas Bipod BT46-LW17 as the bipod of choice for our MDT TAC21 20 inch Suppressed Modular Rifle project. We look forward to comparing the Atlas Bipod BT46-LW17 to our GG&G, Harris and BOBRO Bipods. While I typically  try to purchase as much as possible from Brownells this time around I went with Amazon because for an additional $3.99 I can have the bipod in hand next day and Im anxious to complete the project this week. Here is the Brownells link for those so inclined to support our efforts by visiting our sponsor.

 

For several years, Atlas bipods have dominated the tactical bipod market. The PSR model is the latest offering from Atlas and makes several key improvements over prior models. Fore and Aft pivot limiting bosses and strengthened leg bosses allow the PSR to adapt quickly to any position. The new Non-rotating legs feature internal construction of T7075 aluminum for increased rigidity when building a position. The Atlas PSR is the finest tactical bipod on the market.

  • Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
  • Height Range approximately 4.75 – 9.0″.
  • 15 degrees +/- of preloaded Pan.
  • 15 degrees +/- of preloaded Cant.
  • Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
  • Fore and Aft pivot limiting Bosses*
  • Non-Rotating Legs*
  • Strengthened Leg Boss*
  • Inner Leg constructed from T7075*
  • Weight 13.61 ounces.
  • Available in black only.
  • Lever Mount With ARMS 17S Mount
  • Construction from T6061 Aluminum, Hard Anodized blackStainless steel springs and fasteners
  • UHMW components used for smooth tracking
  • 15 degrees +/- of preloaded Pan
  • 15 degrees +/- of preloaded Cant
  • Preload on Pan and Cant can be tightened by means of the knurled knob
  • Picatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ADM 170-S lever mount.
  • Non orientated leg positioning use either hand to move leg into any of the four leg positions
  • Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
  • All 4 leg positions are solid allowing the shooter to load the bipod at the 45 and 90 degree positions.
  • Non orientated leg length adjustment, Outer leg slides on the Inner leg locating on any of five positions ¾” apart and can be done by either hand.
  • Optional 3” leg extensions to increase height available.
  • Standard soft durable Rubber feet that are suitable for many surfaces.
  • Optional interchangeable Ski and Multi Spiked style feet can be swapped in the field with the press of a ball plunger with a bullet tip.
  • Optional mounting systems available for Accuracy International and Sako rifles.
  • Estimated range of elevation on the BT46 is 5-9” from the surface up to the rail.
  • Made in America

Atlas Bipod BT46-LW17 Downloads:

Installing and Adjusting the ADM Lever

Atlas Bipod


MDT TAC 21 Remington 700 Chassis System Inbound

MDT TAC 21 Remington 700 Chassis System image

MDT TAC 21 Remington 700 Chassis System

MDT TAC 21 Remington 700 Chassis System InboundAs mentioned previously the first project at modularrfle.com is the “MDT TAC21 20 inch Suppressed Modular Rifle” project. We already have the Remington Model 700 SPS Tactical AAC-S on hand on now I am happy to report that the MDT TAC 21 Remington 700 Chassis System is inbound! Don’t be put off by the Brownells backorder status. I spoke with the fine folks at Modular Driven Technologies and they have tripled their production output on the MDT TAC 21 Remington 700 Chassis System.

MDT TAC 21 Remington 700 Chassis System Details

The MDT TAC21™ chassis system a combination of benchrest accuracy, superior ergonomics and specialized design. This chassis brings the bolt action rifles to the next level in versatility and modularity, with an instant improvement in accuracy.

The chassis system is manufactured out of billet 6061-T6 aluminum, which has been hard anodized to mil spec type III for extra strenth, and has been finished with Cerakote™ in Black or Flat Dark Earth (FDE).

TAC21™ chassis is engineered to minimize warping and distortion. The rifle receiver only makes contact with the TAC21™ chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel (diameter up to the receiver size – 1.350”), free floating.

Inherently the TAC21™ has a straightline design, meaning that the recoil comes straight back instead of making the front of the rifle kick upwards. This results in more accurate and quicker follow up shots. This also translates to a decrease in felt recoil and comfort.

MDT TAC 21 Remington 700 Chassis System Compatibility

The TAC21™ chassis system is currently manufactured for the following bolt action rifle platforms:

  • Remington 700 Short Action (.223 and .308 bolt faces)
  • Remington 700 Long Action (.300WM, .338LM, 7mm, 30.06)
  • Savage Short Action, Models 10, 11, 12 and 16 (.223 and .308 bolt faces)
  • Savage Long Action, Models 110, 111, 112 and 116 (.300WM and .338LM)
  • Tikka T3 – Short Calibers (.223 and .308 bolt faces)
  • Tikka T3 – Long Calibers (.300WM, 6.5×55, 7mm, 30.06). Requires MDT 3.560 Magazine.

 

MDT TAC 21 Remington 700 Chassis System Mounting and Compatible Accessories

The TAC21™ chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of  Accessories available on the market.

The TAC21™ chassis uses external box style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails on the fore-end and side of the action housing. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

With a top full length MIL-STN-1913 accessories mounting rail. The built-in mounting rail has 20 MOA (Minutes of Angle) on the action housing and is parallel to the barrel axis on the fore-end.

Note: Long action magazines come in 3 different lengths: 3.715″, 3.775″ an 8.050″. Our chassis use 3.715 magazines. If you purchased the Remington 700 Tactical Chassis Rifle, the magazine well is 3.775.

MDT TAC 21 Remington 700 Chassis System Specifications

  • Increases accuracy by up to 28%
  • Construction aluminum hard anodized to mil spec type III
  • Cerakote Finish in Black or Flat Dark Earth
  • 20 MOA built in top rail
  • Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
  • Lightweight, free-floating modular fore-end
  • Will accommodate barrels as thick as the action
  • Compatible with AICS style magazines in .223 or .308 (SA) and 300WM, 30.06, 338LM (LA). (Long Action Magazine length 3.715)
  • Weight: 3lb – 3.6lb

What you get, and what you need

The TAC21 chassis system comes as a 4-piece chassis, with all required mounting hardware included. This includes new action screws, and a screw for the pistol grip.

To complete this chassis on your rifle, the additional items you need to purchase are:

  • Any AR-15 buttstock or our Skeleton Rifle Stock.
  • A buffer tube for your buttstock. (Both milspec and commercial work on our chassis)
  • An AR-15 Pistol Grip
  • At least one magazine

MDT CHASSIS MDT TAC 21 Remington 700 Chassis