Kinetic Research Group Bravo 10/22 Chassis
KRG Bravo 10/22 Chassis

KRG Bravo 10/22 Chassis

 

Introducing the KRG Bravo 10/22 Chassis. Designed to fit your favorite Ruger 10/22 for that dream build you’ve always wanted. Featuring the same great ergonomics as the standard Bravo but with a slightly shorter minimal LOP (~11.25″) for shooters of all sizes. For those of you over-thinkers out there, don’t worry, the cheekpiece position is still the same as our standard Bravo.

The Bravo is one of the most comfortable stocks available but that’s just the beginning. The full-length stiff aluminum backbone will not allow the forend to flex on you but does allow design modularity with loads of accessories like our popular Spigot Mount and ARCA Rail system.

Kinetic Research Group Bravo 10/22 Chassis

KRG 10/22 Bravo Chassis Multiple Views

KRG 10/22 Bravo Chassis Multiple Views

The ergonomic adjustments are just what you need to fit your frame so you can pull off the difficult shots. Comes standard with tool-less cheek height and a spacer LOP system.

  • Compatible with factory Ruger 10/22 as well 10/22 receivers from Brownells, Bergara, Tactical Solutions, Volquartsen, and KIDD “Classic Slip-Fit” (with or without rear tang screw). We will add to the list of compatible 3rd party receivers as we ensure compatibility
  • Not compatible with take-down models
  • Utilizes factory 10/22 mags
  • Current Spigot mounts don’t fit the 10/22 with a bull barrel
  • Current Spigot mounts don’t fit the 10/22 with a bull barrel
  • Rear tang screw for the KIDD action SOLD SEPARATELY under fasteners
  • 10/22 LOP Extension Kit

KRG Bravo 10/22 Chassis Description and Key Features

Kinetic Research Group 10/22 Bravo Chassis

Kinetic Research Group 10/22 Bravo Chassis

KRG 10/22 Bravo Chassis Forend:

  • Polymer for lightweight and to eliminate heat transfer to/from the shooter’s hand.
  • Mounting holes at various positions will take L2 Picatinny rails, Barrier stop, ARCA Rail, etc…
  • M-lok slots in sides and bottom of forend for universal accessories mounting

KRG 10/22 “Backbone”:

  • Full length aluminum backbone from the action to the tip of the forend
  • Accepts the Whiskey-3 gen 3+ Spigot Mount, but current Spigot mounts will not fit the 10/22 with a bull barrel.
  • Will accept barrel contours up to .920″ in diameter.

KRG 10/22 Cheek-Piece:

  • Infinitely adjustable within range (~1” travel).
  • Can be quickly removed and re-installed, uses a clamp and thumbscrew design.
  • Made of polymer to limit heat transfer to or away from your face.

KRG 10/22 Bravo Length of Pull (LOP):

  • Ships standard .75″ LOP spacer.
  • Standard 3/8″ LOP spacers can be added (available separately) for longer a LOP.

KRG 10/22 Bravo Buttstock:

  • Very strong reinforced polymer material.
  • Mounting points for external QD cup.
  • Built in thumb-shelf for same-side-thumb-grip shooters.
  • Can be configured with a continuous angled lower surface or a “butthook” configuration (Hook Style Cover available separately).
  • Current Bravo Tool-less LOP and Bravo Flat Bag Rider will not fit 10/22 Bravo due to shorter stock.

KRG 10/22 Bravo Recoil Pad:

  • KRG designed injection molded pad that is thin for short LOP. Standard logo’s KRG buttpad is also compatible.

KRG 10/22 Bravo Mounting features for Slings, Monopods, etc:

  • Forend has M-LOK slots on each side and bottom along with other holes for mounting KRG accessories
  • Buttstock has one position on each side for external QD cup (1 ea included).
  • Buttstock includes angled cover with the “Butthook” cover sold separately
  • Harris bipod stud included on forend.
  • Spigot Mount can be added to front of chassis, but current Spigot mounts will not fit the 10/22 with a bull barrel. New Spigot Minimalist to fit the 10/22 with a bull barrel is coming soon.
  • Ambidextrous QD sling plate can be mounted and provides 3 positions for QD sling.

KRG 10/22 Bravo Optional Accessories:

  • Large selection of accessories from sling mounts to tripod mounts.

KRG 10/22 Bravo Materials/Finishes:

  •  Aluminum parts are hard anodized (Type III).
  • Nearly all fasteners are stainless steel, some with black oxide coating, some are without.
  • Steel parts are salt bath nitrided or stainless steel.
  • Forend and buttstock are injection molded reinforced polymer.

 

  • Weight: 2.4 lbs without magazine.
  • Color: Black, FDE (tan), Crimson Red, Stealth Grey
  • Price: $249.99 introductory price, all colors.