Introducing the KRG Bravo 10/22 Chassis. Designed to fit your favorite Ruger 10/22 for that dream build you’ve always wanted. Featuring the same great ergonomics as the standard Bravo but with a slightly shorter minimal LOP (~11.25″) for shooters of all sizes. For those of you over-thinkers out there, don’t worry, the cheekpiece position is still the same as our standard Bravo.
The Bravo is one of the most comfortable stocks available but that’s just the beginning. The full-length stiff aluminum backbone will not allow the forend to flex on you but does allow design modularity with loads of accessories like our popular Spigot Mount and ARCA Rail system.
The ergonomic adjustments are just what you need to fit your frame so you can pull off the difficult shots. Comes standard with tool-less cheek height and a spacer LOP system.
Compatible with factory Ruger 10/22 as well 10/22 receivers from Brownells, Bergara, Tactical Solutions, Volquartsen, and KIDD “Classic Slip-Fit” (with or without rear tang screw). We will add to the list of compatible 3rd party receivers as we ensure compatibility
Not compatible with take-down models
Utilizes factory 10/22 mags
Current Spigot mounts don’t fit the 10/22 with a bull barrel
Current Spigot mounts don’t fit the 10/22 with a bull barrel
Rear tang screw for the KIDD action SOLD SEPARATELY under fasteners
10/22 LOP Extension Kit
KRG Bravo 10/22 Chassis Description and Key Features
Kinetic Research Group 10/22 Bravo Chassis
KRG 10/22 Bravo Chassis Forend:
Polymer for lightweight and to eliminate heat transfer to/from the shooter’s hand.
Mounting holes at various positions will take L2 Picatinny rails, Barrier stop, ARCA Rail, etc…
M-lok slots in sides and bottom of forend for universal accessories mounting
KRG 10/22 “Backbone”:
Full length aluminum backbone from the action to the tip of the forend
Accepts the Whiskey-3 gen 3+ Spigot Mount, but current Spigot mounts will not fit the 10/22 with a bull barrel.
Will accept barrel contours up to .920″ in diameter.
KRG 10/22 Cheek-Piece:
Infinitely adjustable within range (~1” travel).
Can be quickly removed and re-installed, uses a clamp and thumbscrew design.
Made of polymer to limit heat transfer to or away from your face.
KRG 10/22 Bravo Length of Pull (LOP):
Ships standard .75″ LOP spacer.
Standard 3/8″ LOP spacers can be added (available separately) for longer a LOP.
KRG 10/22 Bravo Buttstock:
Very strong reinforced polymer material.
Mounting points for external QD cup.
Built in thumb-shelf for same-side-thumb-grip shooters.
Can be configured with a continuous angled lower surface or a “butthook” configuration (Hook Style Cover available separately).
Current Bravo Tool-less LOP and Bravo Flat Bag Rider will not fit 10/22 Bravo due to shorter stock.
KRG 10/22 Bravo Recoil Pad:
KRG designed injection molded pad that is thin for short LOP. Standard logo’s KRG buttpad is also compatible.
KRG 10/22 Bravo Mounting features for Slings, Monopods, etc:
Forend has M-LOK slots on each side and bottom along with other holes for mounting KRG accessories
Buttstock has one position on each side for external QD cup (1 ea included).
Buttstock includes angled cover with the “Butthook” cover sold separately
Harris bipod stud included on forend.
Spigot Mount can be added to front of chassis, but current Spigot mounts will not fit the 10/22 with a bull barrel. New Spigot Minimalist to fit the 10/22 with a bull barrel is coming soon.
Ambidextrous QD sling plate can be mounted and provides 3 positions for QD sling.
KRG 10/22 Bravo Optional Accessories:
Large selection of accessories from sling mounts to tripod mounts.
KRG 10/22 Bravo Materials/Finishes:
Aluminum parts are hard anodized (Type III).
Nearly all fasteners are stainless steel, some with black oxide coating, some are without.
Steel parts are salt bath nitrided or stainless steel.
Forend and buttstock are injection molded reinforced polymer.
The Generation 5 KRG Whiskey 3 Chassis (W3C) is one of the premier chassis available for your bolt action precision rifle. The W3C combines precise aluminum bedding with tool-less adjustments, durability, and excellent ergonomics. Right out of the box it allows the use of Accuracy International Chassis System (AICS) style magazines in your rifle without any special bottom metal.
Numerous types of accessories can be added to the many attachment points, including hand-stops, sling mounts, rails, bipods, monopods, and more. Modular grip panels allow the shooter to tailor the fit of the stock to his/her hand which, combined with the other adjustments, yield a stock set up exactly as it needs to be for that particular shooter.
The KRG Whiskey 3 Chassis Gen 5 is available in fixed and folding stock versions for the following rifles:
Tikka T3 (non-magnum length calibers).
Remington 700 short and long action.
Badger M2008/13 short action (uses AICS or AI AW magazines).
Badger M2008 long action (AICS CIP length magazines).
The KRG Whiskey 3 Chassis cannot, unfortunately, be made to fit these rifles:
Tikka T3 in long action calibers (there is currently no magazine which will work as the AICS magnum magazines will not work with the T3).
