Best Bipod the Atlas Bipod BT46-LW17
Atlas Bipod PSR BT46-LW17
We purchased the Atlas Bipod BT46-LW17 as the bipod of choice for our MDT TAC21 20 inch Suppressed Modular Rifle project. We look forward to comparing the Atlas Bipod BT46-LW17 to our GG&G, Harris and BOBRO Bipods. While I typically try to purchase as much as possible from Brownells this time around I went with Amazon because for an additional $3.99 I can have the bipod in hand next day and Im anxious to complete the project this week. Here is the Brownells link for those so inclined to support our efforts by visiting our sponsor.
For several years, Atlas bipods have dominated the tactical bipod market. The PSR model is the latest offering from Atlas and makes several key improvements over prior models. Fore and Aft pivot limiting bosses and strengthened leg bosses allow the PSR to adapt quickly to any position. The new Non-rotating legs feature internal construction of T7075 aluminum for increased rigidity when building a position. The Atlas PSR is the finest tactical bipod on the market.
- Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
- Height Range approximately 4.75 – 9.0″.
- 15 degrees +/- of preloaded Pan.
- 15 degrees +/- of preloaded Cant.
- Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
- Fore and Aft pivot limiting Bosses*
- Non-Rotating Legs*
- Strengthened Leg Boss*
- Inner Leg constructed from T7075*
- Weight 13.61 ounces.
- Available in black only.
- Lever Mount With ARMS 17S Mount
- Construction from T6061 Aluminum, Hard Anodized blackStainless steel springs and fasteners
- UHMW components used for smooth tracking
- 15 degrees +/- of preloaded Pan
- 15 degrees +/- of preloaded Cant
- Preload on Pan and Cant can be tightened by means of the knurled knob
- Picatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ADM 170-S lever mount.
- Non orientated leg positioning use either hand to move leg into any of the four leg positions
- Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
- All 4 leg positions are solid allowing the shooter to load the bipod at the 45 and 90 degree positions.
- Non orientated leg length adjustment, Outer leg slides on the Inner leg locating on any of five positions ¾” apart and can be done by either hand.
- Optional 3” leg extensions to increase height available.
- Standard soft durable Rubber feet that are suitable for many surfaces.
- Optional interchangeable Ski and Multi Spiked style feet can be swapped in the field with the press of a ball plunger with a bullet tip.
- Optional mounting systems available for Accuracy International and Sako rifles.
- Estimated range of elevation on the BT46 is 5-9” from the surface up to the rail.
- Made in America
Atlas Bipod BT46-LW17 Downloads:
Installing and Adjusting the ADM Lever
