Site icon Modularrifle.com

GRS BOLTHORN CHASSIS | GRS STOCKS

GRS Bolthorn Chassis | GRS Stocks

GRS Bolthorn Chassis

GRS STOCKS BOLTHORN RIFLE CHASSIS SYSTEM

In 2012 straight from Norway Tikkashooters.com began importing GRS Stocks. The introduction was met with typical groans of expensive and ugly. Undeterred GRS stayed the course made some changes to appease American long range rifle shooters. I think the GRS laminated stocks are some of the best looking in their class. I also think the GRS Bolthorn Chassis System is butt ugly. Remember though form must follow function.This quote to me speaks of the quality and attention to detail.

The balance of this stock is superb. This is proven by being able to balance a fully equipped rifle on its muzzle.

The ultimate in long-range prone shooting, the GRS Bolthorn Chassis is superbly balanced and featured. With GRS Stocks advanced understanding of recoil management, the GRS Bolthorn keeps the line of recoil as close to the core line of the barrel as possible, resulting in unsurpassed recoil absorption and greater accuracy.

Fully equipped with rails, sling mounts, magazine and GRS’ well-known adjustability of cheek-piece, length of pull, and height of recoil pad, the GRS Bolthorn comes ready-to-go as an advanced shooting platform.

GRS Bolthorn Rifle Chassis System

The GRS Bolthorn Chassis is made for long range prone shooting. They are all made in hard anodized T6 6082 aluminum with composite grips and side panels.
The balance of this stock is superb. This is proven by being able to balance a fully equipped rifle on its muzzle.

The stock is designed so the line of the recoil is as close to the core line of the barrel as possible. this means excellent recoil absorption and greater accuracy.

The Bolthorn Chassis comes fully equipped from GRS with all rails, sling mounts, either a 5 or 10 round magazine (Accuracy International AICS compatible magazine well) and of course or famous adjustability on length of pull, cheek piece and height of the recoil pad, all done with a touch of a button.

The grip is fixed on a rail, so you can adjust the distance from the grip to the trigger, giving perfect finger placement.

In most cases it is a matter of dropping the action into the stock and torque up the action screws, then off to the range. (Howa needs a light change on the action to fit the Accuracy International magazines)

The GRS Bolthorn Chassis is available inlets are as follows:

  • SSG 3000/ Sauer 200 STR
  • Tikka T3 SA
  • Tikka T3 LA
  • Howa/ Weatherby Vanguard SA
  • Remington 700  SA
  • Remington 700 LA

  GRS BOLTHORN CHASSIS INLETS

                  GRS STOCKS Product Code Model and Inlet EAN 13

  • 102923, GRS Bolthorn F, Rem 700 BDL LA, 300WinMag, 7072171029237
  • 102922, GRS Bolthorn F, Rem 700 BDL SA, 308, 7072171029220
  • 102920, GRS Bolthorn F, Howa SA, 223, 7072171029206
  • 102919, GRS Bolthorn F, Howa SA, 308, 7072171029190
  • 102916, GRS Bolthorn F, Tikka T3 LA, 30-08, 7072171029169
  • 102915, GRS Bolthorn F, Tikka T3 LA, 300 WinMag, 7072171029152
  • 102910, GRS Bolthorn F, Tikka T3, 223, 7072171029107
  • 102909, GRS Bolthorn F, Tikka T3, 308, 7072171029091
  • 102908, GRS Bolthorn F, SSG 3000, 7072171029084
  • 102907, GRS Bolthorn F, Sauer 200 STR, 7072171029077

GRS BOLTHORN CHASSIS SPECIFICATIONS

  • Body made in hard anodized 6082 T6 aluminum.
  • Hinge is made in 304 stainless steel (extra option)
  • Composite grip and side panels.
  • 0.5″ Limbsaver GRS recoil pad.
  • SpeedLock adjustment system.
  • LOP 35.5-38.3 cm.
  • Total length 78 cm
  • Fore end width 56 mm
  • 28 mm adjustment LOP and cheek-piece.
  • Height adjustable recoil pad included.
  • Flush cup sling mounts on all 4 picatinny rails in front and both sides of the rear stock.
  • Picatinny rail on rear stock.
  • Flush cup sling mounts included.
  • Total length 79 cm
  • Weighs 1850-2000 grams depending on model
  • SSG 3000 model is made to fit original magazines
  • The T3 SA stock comes with one 10 round Polymer magazine in either .308 Winchester  (also fits 243, 260 and 22-250) or 223 Remington (also fits 222).
    The magazine well also fits for the standard 3.050″ (78mm) 5 and 10 shot AI magazines
  • The T3 LA comes with one 5 round single stack metal magazine in either 300Winchester magnum (also fits 7mm rem mag) and 30.06 Springfield (also fits 6.5×55 Swedish Mauser)

Torque recommendations: Rear screw 5nm, Front screw 5nm

Exit mobile version