Site icon Modularrifle.com

MAGPUL PRO 700 REMINGTON 700 RIFLE CHASSIS SYSTEM

Modular Rifle
Magpul Pro 700 Rifle Chassis

Magpul Pro 700 Rifle Chassis

Picture of a Magpul Pro 700 Rifle Chassis
  1. Home
  2. Rifle Chassis System
  3. Magpul Rifle Chassis
  4. MAGPUL PRO 700 REMINGTON 700 RIFLE CHASSIS SYSTEM

Magpul Pro 700 Rifle Chassis System

When Magpul announced the Remington 700 Hunter Stock I remember thinking to myself that it wouldn’t be long until we see a precision rifle chassis from them. I also remember thinking that a well designed priced right precision rifle chassis from Magpul could dominate the low to mid range rifle chassis market. Well I’m here to report the good news that Magpul has officially announced the “Magpul Pro 700” rifle chassis. Unfortunately though I’m more than a little surprised by the $1000 MSRP. That is three times the cost of the hunter stock and in my opinion about 1/3 higher than it should be because at that price shooters are at the price of a complete Savage Stealth or Ruger Precision Rifle. Those are great tack driver chassis based rifles for the cost of the Magpul Pro 700 chassis. Insult to injury the lack of an ARCA plate is a deal breaker for precision rifle crowd. Now with that said I’m a big believer in actually trying hardware first hand instead of relying on critical negative reviews of a product very few have seen or touched. Additionally Magpul still has time to address any perceived shortcomings pointed out by the community.

Ordering Info
Magpul Pro 700 Rifle Chassis System Description

The Magpul Pro 700 Rifle Chassis System is an uncompromising, full featured precision rifle chassis for short action Remington® 700 actions and other Remington® 700 footprint actions. The Pro 700 combines innovative engineering, precision machining, Mil-Spec quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance.

Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700 is also fully ambidextrous. Capable of fitting both right and left-handed actions with the simple swap of a bolt-cutout plate, and with a reversible cheek riser and reversible hinge on the folding version, “lefties” haven’t been “left out.”

Made in U.S.A.

FEATURES

  • Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers
  • Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt cut out plate for left or right hand actions using a 1/8” hex wrench
  • Folding stock with push-button activated durable steel hinge with Melonite® finish is reversible for left or right folding capability with the use of a 5/32” hex wrench. A fixed stock adapter is available for a non-folding stock solution
  • Folding stock is also designed to capture the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles
  • Optional inline mount for clip-on night vision and thermal imaging devices
  • Overall LOP adjustment range is 13.25” – 15.125”
  • Butt pad height can be adjusted up 1.33” and down .90” and is adjustable left or right 5 degrees
  • Comb height adjustment has a 1” range with a secondary locking knob to eliminate movement in the cheek riser
  • Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage
  • Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep, with a .75” fore/aft trigger reach adjustment
  • Additional grip option included with a more aggressive forward sweep (8 degree forward / 20 degree aft edge sweep)
  • Durable steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels
  • M-LOK® slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2)
  • Integrated AICS pattern magazine well optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines
  • Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers
  • Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear and corrosion resistance
  • Ambidextrous thumb shelf for firing hand thumb placement

ITAR
International Traffic in Arms Regulations Controlled Product

Specs

SPECIFICATIONS*

  • Weight –  5.4 lbs
  • Height at Butt Plate – 5.2”
  • Max width – 1.86”
  • Length – 32.7” – 34.6” (23.5” when folded)

* Specifications based on factory configuration.

Magpul Remington Pro 700 SA Adjustable Rifle Chassis

Magpul’s Pro 700 Rifle Chassis combines innovative engineering and precision machining to create a full featured precision rifle chassis for Remington 700 actions. Based on a full billet aluminum skeleton, the Magpul Pro 700 Rifle Chassis is clad in Magpul polymer for comfort, noise mitigation, and ergonomics. With the swap of a bolt-cutout plate, a reversible cheek riser, and reversible hinge the chassis is fully ambidextrous, ensuring that left handed shooters are included in the fun!

  • Machined from 6061-T6 billet aluminum, with Type III hard anodizing
  • Ambidextrous bedding block can be switched for right or left handed shooters
  • Reversible, durable push-button hinge to fold the stock
  • Overall LOP adjustment range is 13.25”-15.125”
  • Butt pad height adjustment from 1.33” down to .90”, also adjust 5 degree left or right
  • Comb height range adjusts 1” with a secondary locking knob, eliminating movement to the cheek riser
  • Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage using only a common hex wrench
  • Chassis features an injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep for enhanced user comfort combined with a .75” fore/aft adjustment range using a common hex wrench
  • Additional grip option included that features a more aggressive sweep and enlarged palm swell
  • Durable cast steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels
  • M-LOK  slots available for accessory mounting
  • Integrated AICS pattern magazine well of reinforced polymer construction optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines
  • Large trigger guard accepts  most factory and aftermarket curved or flat triggers, and can be used with gloves
  • The magazine release is melonite treated steel that is low-profile and ambidextrous

The Magpul Remington 700 Pro Chassis fits up to an MTU barrel contour and is available in black, flat dark earth, and od green. The Remington 700 Pro Chassis would be a great upgrade to an existing gun, or for your next build!

Links to Our Other Guides

| Modular Rifle Chassis System Build Guides | Modular Rifles | Modular Rifle Chassis Systems |Remington 700 Triggers |

Additional 6.5 Creedmoor Content

| 6.5 Creedmoor Posts | J.Allen JAE 700 Rifle Chassis System | Socom Precision Sniper Rifle Contenders | text |

 

Exit mobile version