KRG Bravo 10/22 Chassis

Kinetic Research Group Bravo 10/22 Chassis

KRG 10/22 Bravo Chassis Multiple Views

The ergonomic adjustments are just what you need to fit your frame so you can pull off the difficult shots. Comes standard with tool-less cheek height and a spacer LOP system.

• Compatible with factory Ruger 10/22 as well 10/22 receivers from Brownells, Bergara, Tactical Solutions, Volquartsen, and KIDD “Classic Slip-Fit” (with or without rear tang screw). We will add to the list of compatible 3rd party receivers as we ensure compatibility
• Not compatible with take-down models
• Utilizes factory 10/22 mags
• Current Spigot mounts don’t fit the 10/22 with a bull barrel
• Current Spigot mounts don’t fit the 10/22 with a bull barrel
• Rear tang screw for the KIDD action SOLD SEPARATELY under fasteners
• 10/22 LOP Extension Kit

KRG Bravo 10/22 Chassis Description and Key Features

Kinetic Research Group 10/22 Bravo Chassis

KRG 10/22 Bravo Chassis Forend:

• Polymer for lightweight and to eliminate heat transfer to/from the shooter’s hand.
• Mounting holes at various positions will take L2 Picatinny rails, Barrier stop, ARCA Rail, etc…
• M-lok slots in sides and bottom of forend for universal accessories mounting

KRG 10/22 “Backbone”:

• Full length aluminum backbone from the action to the tip of the forend
• Accepts the Whiskey-3 gen 3+ Spigot Mount, but current Spigot mounts will not fit the 10/22 with a bull barrel.
• Will accept barrel contours up to .920″ in diameter.

KRG 10/22 Cheek-Piece:

• Infinitely adjustable within range (~1” travel).
• Can be quickly removed and re-installed, uses a clamp and thumbscrew design.
• Made of polymer to limit heat transfer to or away from your face.

KRG 10/22 Bravo Length of Pull (LOP):

• Ships standard .75″ LOP spacer.
• Standard 3/8″ LOP spacers can be added (available separately) for longer a LOP.

KRG 10/22 Bravo Buttstock:

• Very strong reinforced polymer material.
• Mounting points for external QD cup.
• Built in thumb-shelf for same-side-thumb-grip shooters.
• Can be configured with a continuous angled lower surface or a “butthook” configuration (Hook Style Cover available separately).
• Current Bravo Tool-less LOP and Bravo Flat Bag Rider will not fit 10/22 Bravo due to shorter stock.

KRG 10/22 Bravo Recoil Pad:

• KRG designed injection molded pad that is thin for short LOP. Standard logo’s KRG buttpad is also compatible.

KRG 10/22 Bravo Mounting features for Slings, Monopods, etc:

• Forend has M-LOK slots on each side and bottom along with other holes for mounting KRG accessories
• Buttstock has one position on each side for external QD cup (1 ea included).
• Buttstock includes angled cover with the “Butthook” cover sold separately
• Harris bipod stud included on forend.
• Spigot Mount can be added to front of chassis, but current Spigot mounts will not fit the 10/22 with a bull barrel. New Spigot Minimalist to fit the 10/22 with a bull barrel is coming soon.
• Ambidextrous QD sling plate can be mounted and provides 3 positions for QD sling.

KRG 10/22 Bravo Optional Accessories:

• Large selection of accessories from sling mounts to tripod mounts.

KRG 10/22 Bravo Materials/Finishes:

•  Aluminum parts are hard anodized (Type III).
• Nearly all fasteners are stainless steel, some with black oxide coating, some are without.
• Steel parts are salt bath nitrided or stainless steel.
• Forend and buttstock are injection molded reinforced polymer.

• Weight: 2.4 lbs without magazine.
• Color: Black, FDE (tan), Crimson Red, Stealth Grey
• Price: $249.99 introductory price, all colors.